[PATCH] mtd: spinand: macronix: Add support for serial NAND flash
jaimeliao at mxic.com.tw
jaimeliao at mxic.com.tw
Wed May 19 18:45:08 PDT 2021
From: Jaime Liao <jaimeliao at mxic.com.tw>
Macronix NAND Flash devices are available in different configurations
and densities.
MX"35" means SPI NAND
MX35"LF"/"UF" , LF means 3V and UF meands 1.8V
MX35LF"2G" , 2G means 2Gbits
MX35LF2G"E4"/"24"/"14",
E4 means internal ECC and Quad I/O(x4)
24 means 8-bit ecc requirement and Quad I/O(x4)
14 means 4-bit ecc requirement and Quad I/O(x4)
MX35LF2G14AC is 3V 2Gbit serial NAND flash device
(without on-die ECC)
https://www.mxic.com.tw/Lists/Datasheet/Attachments/7926/MX35LF2G14AC,%203V,%202Gb,%20v1.1.pdf
MX35UF4G24AD is 1.8V 4Gbit serial NAND flash device
(without on-die ECC)
https://www.mxic.com.tw/Lists/Datasheet/Attachments/7980/MX35UF4G24AD,%201.8V,%204Gb,%20v0.00.pdf
MX35UF4GE4AD/MX35UF2GE4AD are 1.8V 4G/2Gbit serial
NAND flash device with 8-bit on-die ECC
https://www.mxic.com.tw/Lists/Datasheet/Attachments/7983/MX35UF4GE4AD,%201.8V,%204Gb,%20v0.00.pdf
MX35UF2GE4AC/MX35UF1GE4AC are 1.8V 2G/1Gbit serial
NAND flash device with 8-bit on-die ECC
https://www.mxic.com.tw/Lists/Datasheet/Attachments/7974/MX35UF2GE4AC,%201.8V,%202Gb,%20v1.0.pdf
MX35UF2G14AC/MX35UF1G14AC are 1.8V 2G/1Gbit serial
NAND flash device (without on-die ECC)
https://www.mxic.com.tw/Lists/Datasheet/Attachments/7931/MX35UF2G14AC,%201.8V,%202Gb,%20v1.1.pdf
Validated via normal(default) and QUAD mode by read, erase, read back,
on Xilinx Zynq PicoZed FPGA board which included Macronix
SPI Host(drivers/spi/spi-mxic.c).
Signed-off-by: Jaime Liao <jaimeliao at mxic.com.tw>
---
drivers/mtd/nand/spi/macronix.c | 112 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 6701aaa..a989035 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -186,6 +186,118 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
0 /*SPINAND_HAS_QE_BIT*/,
SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
mx35lf1ge4ab_ecc_get_status)),
+
+ SPINAND_INFO("MX35LF2G14AC",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x20),
+ NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 2, 1, 1),
+ NAND_ECCREQ(4, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX35UF4G24AD",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xb5),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 2, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX35UF4GE4AD",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xb7),
+ NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX35UF2G14AC",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xa0),
+ NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 2, 1, 1),
+ NAND_ECCREQ(4, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX35UF2G24AD",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xa4),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX35UF2GE4AD",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xa6),
+ NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX35UF2GE4AC",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xa2),
+ NAND_MEMORG(1, 2048, 64, 64, 2048, 40, 1, 1, 1),
+ NAND_ECCREQ(4, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX35UF1G14AC",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x90),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(4, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX35UF1G24AD",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x94),
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX35UF1GE4AD",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x96),
+ NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(8, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+ SPINAND_INFO("MX35UF1GE4AC",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x92),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(4, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+ mx35lf1ge4ab_ecc_get_status)),
+
};
static const struct spinand_manufacturer_ops macronix_spinand_manuf_ops = {
--
1.9.1
More information about the linux-mtd
mailing list