[PATCH 13/13] mtd: spinand: Add support for Winbond W35N01JW SPI NAND flash
Apurva Nandan
a-nandan at ti.com
Tue Jul 13 06:05:38 PDT 2021
Winbond W35N01JW is SPI NAND flash supporting Octal DTR SPI protocol.
Add op_vairants for W35N01JW, which include the Octal DTR read/write
page ops as well. Add W35N01JW's oob layout functions for the
mtd_ooblayout_ops. Add all op adjustments required for Octal DTR SPI
mode using the adjust_op(). Finally, add an entry for W35N01JW in
spinand_info table.
Datasheet: https://www.winbond.com/export/sites/winbond/datasheet/W35N01JW_Datasheet_Brief.pdf
Signed-off-by: Apurva Nandan <a-nandan at ti.com>
---
drivers/mtd/nand/spi/winbond.c | 116 ++++++++++++++++++++++++++++++---
1 file changed, 107 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index 58cda07c15a0..5c2b9e61b624 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -16,6 +16,13 @@
#define WINBOND_CFG_BUF_READ BIT(3)
+#define WINBOND_BLK_ERASE_OPCODE 0xD8
+#define WINBOND_PAGE_READ_OPCODE 0x13
+#define WINBOND_PROG_EXEC_OPCODE 0x10
+#define WINBOND_READ_REG_OPCODE_1 0x05
+#define WINBOND_READ_REG_OPCODE_2 0x0F
+#define WINBOND_READ_VCR_OPCODE 0x85
+
/* Octal DTR SPI mode (8D-8D-8D) with Data Strobe output*/
#define WINBOND_IO_MODE_VCR_OCTAL_DTR 0xE7
#define WINBOND_IO_MODE_VCR_ADDR 0x00
@@ -24,7 +31,7 @@
#define WINBOND_DUMMY_CLK_COUNT 12
#define WINBOND_DUMMY_CLK_VCR_ADDR 0x01
-static SPINAND_OP_VARIANTS(read_cache_variants,
+static SPINAND_OP_VARIANTS(read_cache_variants_w25xxgv,
SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
@@ -32,14 +39,27 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-static SPINAND_OP_VARIANTS(write_cache_variants,
+static SPINAND_OP_VARIANTS(write_cache_variants_w25xxgv,
SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
SPINAND_PROG_LOAD(true, 0, NULL, 0));
-static SPINAND_OP_VARIANTS(update_cache_variants,
+static SPINAND_OP_VARIANTS(update_cache_variants_w25xxgv,
SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
SPINAND_PROG_LOAD(false, 0, NULL, 0));
+static SPINAND_OP_VARIANTS(read_cache_variants_w35n01jw,
+ SPINAND_PAGE_READ_FROM_CACHE_OCTALIO_DTR_OP(0, 24, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants_w35n01jw,
+ SPINAND_PROG_LOAD_OCTALIO_DTR(true, 0, NULL, 0),
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants_w35n01jw,
+ SPINAND_PROG_LOAD_OCTALIO_DTR(false, 0, NULL, 0),
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
static int w25m02gv_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *region)
{
@@ -64,11 +84,40 @@ static int w25m02gv_ooblayout_free(struct mtd_info *mtd, int section,
return 0;
}
+static int w35n01jw_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ region->offset = (16 * section) + 12;
+ region->length = 4;
+
+ return 0;
+}
+
+static int w35n01jw_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 7)
+ return -ERANGE;
+
+ region->offset = (16 * section) + 2;
+ region->length = 10;
+
+ return 0;
+}
+
static const struct mtd_ooblayout_ops w25m02gv_ooblayout = {
.ecc = w25m02gv_ooblayout_ecc,
.free = w25m02gv_ooblayout_free,
};
+static const struct mtd_ooblayout_ops w35n01jw_ooblayout = {
+ .ecc = w35n01jw_ooblayout_ecc,
+ .free = w35n01jw_ooblayout_free,
+};
+
static int w25m02gv_select_target(struct spinand_device *spinand,
unsigned int target)
{
@@ -88,9 +137,9 @@ static const struct spinand_info winbond_spinand_table[] = {
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xab),
NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 2),
NAND_ECCREQ(1, 512),
- SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
- &write_cache_variants,
- &update_cache_variants),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_w25xxgv,
+ &write_cache_variants_w25xxgv,
+ &update_cache_variants_w25xxgv),
0,
SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
SPINAND_SELECT_TARGET(w25m02gv_select_target)),
@@ -98,11 +147,22 @@ static const struct spinand_info winbond_spinand_table[] = {
SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xaa),
NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
NAND_ECCREQ(1, 512),
- SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
- &write_cache_variants,
- &update_cache_variants),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_w25xxgv,
+ &write_cache_variants_w25xxgv,
+ &update_cache_variants_w25xxgv),
0,
SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
+ SPINAND_INFO("W35N01JW",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0xdc),
+ NAND_MEMORG(1, 4096, 128, 64, 512, 20, 1, 1, 1),
+ NAND_ECCREQ(1, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_w35n01jw,
+ &write_cache_variants_w35n01jw,
+ &update_cache_variants_w35n01jw),
+ SPINAND_HAS_OCTAL_DTR_BIT | SPINAND_HAS_POR_CMD_BIT |
+ SPINAND_HAS_CR_FEAT_BIT,
+ SPINAND_ECCINFO(&w35n01jw_ooblayout, NULL)),
+
};
static int winbond_spinand_init(struct spinand_device *spinand)
@@ -183,9 +243,47 @@ static int winbond_spinand_octal_dtr_enable(struct spinand_device *spinand)
return 0;
}
+static void winbond_spinand_adjust_op(struct spi_mem_op *op,
+ const enum spinand_proto reg_proto)
+{
+ /*
+ * To support both 1 byte opcode and 2 byte opcodes, extract the MSB
+ * byte from the opcode as the LSB byte in 2 byte opcode is treated as
+ * don't care.
+ */
+ u8 opcode = op->cmd.opcode >> (8 * (op->cmd.nbytes - 1));
+
+ if (reg_proto == SPINAND_OCTAL_DTR) {
+ switch (opcode) {
+ case WINBOND_READ_REG_OPCODE_1:
+ case WINBOND_READ_REG_OPCODE_2:
+ op->dummy.nbytes = 14;
+ op->dummy.buswidth = 8;
+ op->dummy.dtr = true;
+ return;
+
+ case WINBOND_READ_VCR_OPCODE:
+ op->dummy.nbytes = 16;
+ op->dummy.buswidth = 8;
+ op->dummy.dtr = true;
+ return;
+
+ case WINBOND_BLK_ERASE_OPCODE:
+ case WINBOND_PAGE_READ_OPCODE:
+ case WINBOND_PROG_EXEC_OPCODE:
+ op->addr.nbytes = 2;
+ return;
+
+ default:
+ return;
+ }
+ }
+}
+
static const struct spinand_manufacturer_ops winbond_spinand_manuf_ops = {
.init = winbond_spinand_init,
.octal_dtr_enable = winbond_spinand_octal_dtr_enable,
+ .adjust_op = winbond_spinand_adjust_op,
};
const struct spinand_manufacturer winbond_spinand_manufacturer = {
--
2.17.1
More information about the linux-mtd
mailing list