[PATCH v4 0/6] mtd: spi-nor: Add support for Cypress s25hl-t/s25hs-t

[Tudor.Ambarus at microchip.com]

Hi,

On 3/19/21 8:51 AM, tkuw584924 at gmail.com wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> From: Takahiro Kuwano <Takahiro.Kuwano at infineon.com>
> 
> The S25HL-T/S25HS-T family is the Cypress Semper Flash with Quad SPI.
> 
> The summary datasheets can be found in the following links.
> https://www.cypress.com/file/424146/download (256Mb/512Mb/1Gb, single die)
> https://www.cypress.com/file/499246/download (2Gb/4Gb, dual/quad die)
> 
> The full version can be found in the following links (registration
> required).
> https://community.cypress.com/t5/Semper-Flash-Access-Program/Datasheet-Semper-Flash-with-Quad-SPI/ta-p/260789?attachment-id=19522
> https://community.cypress.com/t5/Semper-Flash-Access-Program/Datasheet-2Gb-MCP-Semper-Flash-with-Quad-SPI/ta-p/260823?attachment-id=29503

Takahiro, looks like I can't access the dual/quad die full datasheet, not enough rights,
even after creating an account.

How are multi die ops handled when crossing a die boundary?

> 
> Tested on Xilinx Zynq-7000 FPGA board.

Have you tried to erase/read/write multiple dies with a single request?

Cheers,
ta
> 
> Changes in v4:
>   - Reword 'legacy' to 'default'
>   - Rename spi_nor_read() to spi_nor_default_ready()
>   - Fix dummy cycle calculation in spansion_read_any_reg()
>   - Modify comment for spansion_write_any_reg()
>   - Merge block comments about SMPT in s25hx_t_post_sfdp_fixups()
>   - Remove USE_CLSR flags from S25HL02GT and S25HS02GT
> 
> Changes in v3:
>   - Split into multiple patches
>   - Remove S25HL256T and S25HS256T
>   - Add S25HL02GT and S25HS02GT
>   - Add support for multi-die package parts support
>   - Cleanup Read/Write Any Register implementation
>   - Remove erase_map fix for top/split sector layout
>   - Set ECC data unit size (16B) to writesize
> 
> Changes in v2:
>   - Remove SPI_NOR_SKIP_SFDP flag and clean up related fixups
>   - Check CFR3V[4] to determine page_size instead of force 512B
>   - Depend on the patchset below to support non-uniform sector layout
>     https://lore.kernel.org/linux-mtd/cover.1601612872.git.Takahiro.Kuwano@infineon.com/
> 
> Takahiro Kuwano (6):
>   mtd: spi-nor: core: Add the ->ready() hook
>   mtd: spi-nor: core: Expose spi_nor_clear_sr() to manufacturer drivers
>   mtd: spi-nor: spansion: Add support for Read/Write Any  Register
>   mtd: spi-nor: spansion: Add support for volatile QE bit
>   mtd: spi-nor: spansion: Add status check for multi-die parts
>   mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups
> 
>  drivers/mtd/spi-nor/core.c     |  10 +-
>  drivers/mtd/spi-nor/core.h     |   3 +
>  drivers/mtd/spi-nor/spansion.c | 325 +++++++++++++++++++++++++++++++++
>  3 files changed, 334 insertions(+), 4 deletions(-)
> 
> --
> 2.25.1
>