[PATCH] mtd: nand: vf610: set correct ooblayout

[Boris Brezillon]

On Fri,  9 Feb 2018 13:21:42 +0100
Stefan Agner <stefan at agner.ch> wrote:

> With commit 3cf32d180227 ("mtd: nand: vf610: switch to
> mtd_ooblayout_ops") the driver started to use the NAND cores
> default large page ooblayout. However, shortly after commit
> 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout")
> changed the default layout to the old hamming layout, which is
> not what vf610_nfc is using. Specify the default large page
> layout explicitly.

Applied.

Thanks,

Boris

> 
> Fixes: 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout")
> Cc: <stable at vger.kernel.org> # v4.12+
> Signed-off-by: Stefan Agner <stefan at agner.ch>
> ---
>  drivers/mtd/nand/vf610_nfc.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
> index 80d31a58e558..f367144f3c6f 100644
> --- a/drivers/mtd/nand/vf610_nfc.c
> +++ b/drivers/mtd/nand/vf610_nfc.c
> @@ -752,10 +752,8 @@ static int vf610_nfc_probe(struct platform_device *pdev)
>  		if (mtd->oobsize > 64)
>  			mtd->oobsize = 64;
>  
> -		/*
> -		 * mtd->ecclayout is not specified here because we're using the
> -		 * default large page ECC layout defined in NAND core.
> -		 */
> +		/* Use default large page ECC layout defined in NAND core */
> +		mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
>  		if (chip->ecc.strength == 32) {
>  			nfc->ecc_mode = ECC_60_BYTE;
>  			chip->ecc.bytes = 60;



-- 
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com