[PATCH] mtd: nand: vf610: set correct ooblayout

[Stefan Agner]

With commit 3cf32d180227 ("mtd: nand: vf610: switch to
mtd_ooblayout_ops") the driver started to use the NAND cores
default large page ooblayout. However, shortly after commit
6a623e076944 ("mtd: nand: add ooblayout for old hamming layout")
changed the default layout to the old hamming layout, which is
not what vf610_nfc is using. Specify the default large page
layout explicitly.

Fixes: 6a623e076944 ("mtd: nand: add ooblayout for old hamming layout")
Cc: <stable at vger.kernel.org> # v4.12+
Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 drivers/mtd/nand/vf610_nfc.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
index 80d31a58e558..f367144f3c6f 100644
--- a/drivers/mtd/nand/vf610_nfc.c
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -752,10 +752,8 @@ static int vf610_nfc_probe(struct platform_device *pdev)
 		if (mtd->oobsize > 64)
 			mtd->oobsize = 64;
 
-		/*
-		 * mtd->ecclayout is not specified here because we're using the
-		 * default large page ECC layout defined in NAND core.
-		 */
+		/* Use default large page ECC layout defined in NAND core */
+		mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
 		if (chip->ecc.strength == 32) {
 			nfc->ecc_mode = ECC_60_BYTE;
 			chip->ecc.bytes = 60;
-- 
2.16.1