[PATCH v3 5/5] mtd: mchp23k256: Add support for mchp23lcv1024
Boris Brezillon
boris.brezillon at free-electrons.com
Tue May 23 00:14:23 PDT 2017
Le Tue, 23 May 2017 12:43:17 +1200,
Chris Packham <chris.packham at alliedtelesis.co.nz> a écrit :
> The mchp23lcv1024 is software compatible with the mchp23k256, the
> only difference (from a software point of view) is the size. There
> is no way to detect the size so we must be told via a Device Tree.
>
> Signed-off-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
> ---
> Changes in v2:
> - fix formatting in switch statement
> - add support for 24-bit addressing
> Changes in v3:
> - None
>
> .../bindings/mtd/microchip,mchp23k256.txt | 2 +-
> drivers/mtd/devices/mchp23k256.c | 53 ++++++++++++++++++----
> 2 files changed, 44 insertions(+), 11 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> index 25e5ad38b0f0..7328eb92a03c 100644
> --- a/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> +++ b/Documentation/devicetree/bindings/mtd/microchip,mchp23k256.txt
> @@ -3,7 +3,7 @@
> Required properties:
> - #address-cells, #size-cells : Must be present if the device has sub-nodes
> representing partitions.
> -- compatible : Must be "microchip,mchp23k256"
> +- compatible : Must be one of "microchip,mchp23k256" or "microchip,mchp23lcv1024"
> - reg : Chip-Select number
> - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
>
> diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
> index 3e5feb454644..72ecf374a06a 100644
> --- a/drivers/mtd/devices/mchp23k256.c
> +++ b/drivers/mtd/devices/mchp23k256.c
> @@ -21,10 +21,14 @@
> #include <linux/spi/spi.h>
> #include <linux/of_device.h>
>
> +#define MAX_CMD_SIZE 4
> +enum chips { mchp23k256, mchp23lcv1024 };
> +
> struct mchp23k256_flash {
> struct spi_device *spi;
> struct mutex lock;
> struct mtd_info mtd;
> + u8 addr_width;
> };
How about creating a struct mchp23_caps or mchp23_specs struct
containing the SRAM specs.
struct mchp23_caps {
u8 addr_width;
unsigned int size;
}
and then
struct mchp23k256_flash {
...
const struct mchp32_cap *caps;
};
This way you can get rid of the enum and add new fields to the caps
struct if needed.
BTW, it's really weird to have the _flash extension in the struct name,
while we're actually dealing with SRAMs.
>
> #define MCHP23K256_CMD_WRITE_STATUS 0x01
> @@ -34,22 +38,35 @@ struct mchp23k256_flash {
>
> #define to_mchp23k256_flash(x) container_of(x, struct mchp23k256_flash, mtd)
>
> +static void mchp23k256_addr2cmd(struct mchp23k256_flash *flash,
> + unsigned int addr, u8 *cmd)
> +{
> + /* cmd[0] has opcode */
> + cmd[1] = addr >> (flash->addr_width * 8 - 8);
> + cmd[2] = addr >> (flash->addr_width * 8 - 16);
> + cmd[3] = addr >> (flash->addr_width * 8 - 24);
or
int i;
/*
* Address is sent in big endian (MSB first) and we skip
* the first entry of the cmd array which contains the cmd
* opcode.
*/
for (i = flash->caps->addr_width; i--, addr >>= 8; i > 0)
cmd[i] = addr;
> +}
> +
> +static int mchp23k256_cmdsz(struct mchp23k256_flash *flash)
> +{
> + return 1 + flash->addr_width;
> +}
> +
> static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len,
> size_t *retlen, const unsigned char *buf)
> {
> struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
> struct spi_transfer transfer[2] = {};
> struct spi_message message;
> - unsigned char command[3];
> + unsigned char command[MAX_CMD_SIZE];
>
> spi_message_init(&message);
>
> command[0] = MCHP23K256_CMD_WRITE;
> - command[1] = to >> 8;
> - command[2] = to;
> + mchp23k256_addr2cmd(flash, to, command);
>
> transfer[0].tx_buf = command;
> - transfer[0].len = sizeof(command);
> + transfer[0].len = mchp23k256_cmdsz(flash);
> spi_message_add_tail(&transfer[0], &message);
>
> transfer[1].tx_buf = buf;
> @@ -73,17 +90,16 @@ static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len,
> struct mchp23k256_flash *flash = to_mchp23k256_flash(mtd);
> struct spi_transfer transfer[2] = {};
> struct spi_message message;
> - unsigned char command[3];
> + unsigned char command[MAX_CMD_SIZE];
>
> spi_message_init(&message);
>
> memset(&transfer, 0, sizeof(transfer));
> command[0] = MCHP23K256_CMD_READ;
> - command[1] = from >> 8;
> - command[2] = from;
> + mchp23k256_addr2cmd(flash, from, command);
>
> transfer[0].tx_buf = command;
> - transfer[0].len = sizeof(command);
> + transfer[0].len = mchp23k256_cmdsz(flash);
> spi_message_add_tail(&transfer[0], &message);
>
> transfer[1].rx_buf = buf;
static const struct mchp23_caps mchp23k256_caps = {
.size = SZ_32K,
.addr_width = 2;
};
static const struct mchp23_caps mchp23lcv1024_caps = {
.size = SZ_128K,
.addr_width = 3;
};
> @@ -128,6 +144,7 @@ static int mchp23k256_probe(struct spi_device *spi)
> struct mchp23k256_flash *flash;
> struct flash_platform_data *data;
> int err;
> + enum chips chip;
>
> flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
> if (!flash)
> @@ -143,15 +160,30 @@ static int mchp23k256_probe(struct spi_device *spi)
>
> data = dev_get_platdata(&spi->dev);
>
> + if (spi->dev.of_node)
> + chip = (enum chips)of_device_get_match_data(&spi->dev);
> + else
> + chip = mchp23k256;
flash->caps = of_device_get_match_data(&spi->dev);
if (!flash->caps)
flash->caps = mchp23k256_caps;
> +
> mtd_set_of_node(&flash->mtd, spi->dev.of_node);
> flash->mtd.dev.parent = &spi->dev;
> flash->mtd.type = MTD_RAM;
> flash->mtd.flags = MTD_CAP_RAM;
> flash->mtd.writesize = 1;
> - flash->mtd.size = SZ_32K;
> flash->mtd._read = mchp23k256_read;
> flash->mtd._write = mchp23k256_write;
>
> + switch (chip) {
> + case mchp23lcv1024:
> + flash->mtd.size = SZ_128K;
> + flash->addr_width = 3;
> + break;
> + default:
> + flash->mtd.size = SZ_32K;
> + flash->addr_width = 2;
> + break;
> + }
> +
> err = mtd_device_register(&flash->mtd, data ? data->parts : NULL,
> data ? data->nr_parts : 0);
> if (err)
> @@ -168,7 +200,8 @@ static int mchp23k256_remove(struct spi_device *spi)
> }
>
> static const struct of_device_id mchp23k256_of_table[] = {
> - { .compatible = "microchip,mchp23k256" },
> + { .compatible = "microchip,mchp23k256", .data = (void *)mchp23k256 },
> + { .compatible = "microchip,mchp23lcv1024", .data = (void *)mchp23lcv1024 },
{
.compatible = "microchip,mchp23k256",
.data = &mchp23k256_caps,
},
{
.compatible = "microchip,mchp23lcv1024",
.data = &mchp23lcv1024_caps,
},
> {}
> };
> MODULE_DEVICE_TABLE(of, mchp23k256_of_table);
More information about the linux-mtd
mailing list