[PATCH v2 11/53] mtd: nand: denali: fix bitflips calculation in handle_ecc()

[Masahiro Yamada]

Hi Boris,

2017-03-23 5:57 GMT+09:00 Boris Brezillon <boris.brezillon at free-electrons.com>:
> On Wed, 22 Mar 2017 23:07:18 +0900
> Masahiro Yamada <yamada.masahiro at socionext.com> wrote:
>
>> +     do {
>> +             err_addr = ioread32(denali->flash_reg + ECC_ERROR_ADDRESS);
>> +             err_sector = ECC_SECTOR(err_addr);
>> +             err_byte = ECC_BYTE(err_addr);
>> +
>> +             err_cor_info = ioread32(denali->flash_reg + ERR_CORRECTION_INFO);
>> +             err_cor_value = ECC_CORRECTION_VALUE(err_cor_info);
>> +             err_device = ECC_ERR_DEVICE(err_cor_info);
>> +
>> +             /* reset the bitflip counter when crossing ECC sector */
>> +             if (err_sector != prev_sector)
>> +                     bitflips = 0;
>> +
>> +             if (ECC_ERROR_UNCORRECTABLE(err_cor_info)) {
>> +                     /*
>> +                      * if the error is not correctable, need to look at the
>> +                      * page to see if it is an erased page. if so, then
>> +                      * it's not a real ECC error
>> +                      */
>> +                     ret = -EBADMSG;
>
> You should never return -EBADMSG directly. Just increment
> ecc_stats.failed and let the core return -EBADMSG to the upper layer.
>

Here, -EBADMSG is used like that returned from  ->ecc.correct()


Please notice denali_read_page() never returns -EBADMSG.

 -EBADMSG is used as a mark "we need erased page check".


I think nand_read_page_syndrome() does similar;
-EBADMSG is used internally.



-- 
Best Regards
Masahiro Yamada