[PATCH v2 11/53] mtd: nand: denali: fix bitflips calculation in handle_ecc()

[Boris Brezillon]

On Wed, 22 Mar 2017 23:07:18 +0900
Masahiro Yamada <yamada.masahiro at socionext.com> wrote:

> +	do {
> +		err_addr = ioread32(denali->flash_reg + ECC_ERROR_ADDRESS);
> +		err_sector = ECC_SECTOR(err_addr);
> +		err_byte = ECC_BYTE(err_addr);
> +
> +		err_cor_info = ioread32(denali->flash_reg + ERR_CORRECTION_INFO);
> +		err_cor_value = ECC_CORRECTION_VALUE(err_cor_info);
> +		err_device = ECC_ERR_DEVICE(err_cor_info);
> +
> +		/* reset the bitflip counter when crossing ECC sector */
> +		if (err_sector != prev_sector)
> +			bitflips = 0;
> +
> +		if (ECC_ERROR_UNCORRECTABLE(err_cor_info)) {
> +			/*
> +			 * if the error is not correctable, need to look at the
> +			 * page to see if it is an erased page. if so, then
> +			 * it's not a real ECC error
> +			 */
> +			ret = -EBADMSG;

You should never return -EBADMSG directly. Just increment
ecc_stats.failed and let the core return -EBADMSG to the upper layer.