[PATCH 1/4] mtd: spi-nor: aspeed: remove dummies from keep mask

[Cyrille Pitchen]

Le 20/04/2017 à 15:28, Marek Vasut a écrit :
> On 04/20/2017 01:56 PM, Cédric Le Goater wrote:
>> There is no need to keep the dummy bytes in the control register if
>> the command mode is not kept also. This could lead to an inconsistent
>> setting : normal read mode (command 0x3) and dummy bytes. It is to be
>> noted that the HW allows such a configuration.
>>
>> Signed-off-by: Cédric Le Goater <clg at kaod.org>
> 
> Reviewed-by: Marek Vasut <marek.vasut at gmail.com>
>

Applied to the spi-nor/next branch of l2-mtd

Thanks!

>> ---
>>  drivers/mtd/spi-nor/aspeed-smc.c | 3 +--
>>  1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c
>> index 56051d30f000..2940f2098420 100644
>> --- a/drivers/mtd/spi-nor/aspeed-smc.c
>> +++ b/drivers/mtd/spi-nor/aspeed-smc.c
>> @@ -180,8 +180,7 @@ struct aspeed_smc_controller {
>>  
>>  #define CONTROL_KEEP_MASK						\
>>  	(CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \
>> -	 CONTROL_IO_DUMMY_MASK | CONTROL_CLOCK_FREQ_SEL_MASK |		\
>> -	 CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3)
>> +	 CONTROL_CLOCK_FREQ_SEL_MASK | CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3)
>>  
>>  /*
>>   * The Segment Register uses a 8MB unit to encode the start address
>>
> 
>