[PATCH] mtd: nand: Fix timing setup for NANDs that do not support SET FEATURES

[Boris Brezillon]

On Mon, 31 Jul 2017 10:29:56 +0200
Boris Brezillon <boris.brezillon at free-electrons.com> wrote:

> Some ONFI NANDs do not support the SET/GET FEATURES commands, which,
> according to the spec, is perfectly valid.
> 
> On these NANDs we can't set a specific timing mode using the "timing
> mode" feature, and we should assume the NAND does not require any setup
> to enter a specific timing mode.

Applied to nand/fixes.

> 
> Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> Fixes: d8e725dd8311 ("mtd: nand: automate NAND timings selection")
> Reported-by: Alexander Dahl <ada at thorsis.com>
> Cc: <stable at vger.kernel.org>
> ---
>  drivers/mtd/nand/nand_base.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index 7b3826b42447..f2bd2c00a8a1 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -1131,7 +1131,9 @@ static int nand_setup_data_interface(struct nand_chip *chip, int chipnr)
>  	 * Ensure the timing mode has been changed on the chip side
>  	 * before changing timings on the controller side.
>  	 */
> -	if (chip->onfi_version) {
> +	if (chip->onfi_version &&
> +	    (le16_to_cpu(chip->onfi_params.opt_cmd) &
> +	     ONFI_OPT_CMD_SET_GET_FEATURES)) {
>  		u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = {
>  			chip->onfi_timing_mode_default,
>  		};