[PATCH] mtd: nand: Fix timing setup for NANDs that do not support SET FEATURES
Alexander Dahl
ada at thorsis.com
Mon Jul 31 04:52:42 PDT 2017
Hello,
Tested-by: Alexander Dahl <ada at thorsis.com>
Greets
Alex
Am Montag, 31. Juli 2017, 10:29:56 schrieb Boris Brezillon:
> Some ONFI NANDs do not support the SET/GET FEATURES commands, which,
> according to the spec, is perfectly valid.
>
> On these NANDs we can't set a specific timing mode using the "timing
> mode" feature, and we should assume the NAND does not require any
> setup to enter a specific timing mode.
>
> Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> Fixes: d8e725dd8311 ("mtd: nand: automate NAND timings selection")
> Reported-by: Alexander Dahl <ada at thorsis.com>
> Cc: <stable at vger.kernel.org>
> ---
> drivers/mtd/nand/nand_base.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/nand_base.c
> b/drivers/mtd/nand/nand_base.c index 7b3826b42447..f2bd2c00a8a1
> 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -1131,7 +1131,9 @@ static int nand_setup_data_interface(struct
> nand_chip *chip, int chipnr) * Ensure the timing mode has been
> changed on the chip side * before changing timings on the controller
> side.
> */
> - if (chip->onfi_version) {
> + if (chip->onfi_version &&
> + (le16_to_cpu(chip->onfi_params.opt_cmd) &
> + ONFI_OPT_CMD_SET_GET_FEATURES)) {
> u8 tmode_param[ONFI_SUBFEATURE_PARAM_LEN] = {
> chip->onfi_timing_mode_default,
> };
More information about the linux-mtd
mailing list