[PATCH 00/11] Introduction to SPI NAND framework

[Peter Pan]

Hi Richard,


On Tue, Feb 21, 2017 at 4:05 PM, Richard Weinberger <richard at nod.at> wrote:
> Peter,
>
> Am 21.02.2017 um 08:59 schrieb Peter Pan:
>> This serie introductes a SPI NAND framework.
>> SPI NAND is a new NAND family device with SPI protocol as
>> its interface. And its command set is totally different
>> with parallel NAND.
>>
>> Our first attempt was more than 2 years ago[1]. At that
>> time, I didn't make BBT shareable and there were too many
>> duplicate code with parallel NAND, so that serie stoped.
>> But the discussion never stops. Now Boris has a plan to
>> make a generic NAND framework which can be shared with
>> both parallel and SPI NAND. Now the first step of the
>> new generic NAND framework is finished. And it is waiting
>> for a user. After discussion with Boris. We both think it's
>> time to rebuild SPI NAND framework based on the new NAND
>> framework and send out for reviewing.
>>
>> This serie is based on Boris's nand/generic branch[2], which
>> is on 4.9-rc1. In this serie, BBT code is totally shared.
>> Of course SPI NAND can share more code with parallel, this
>> requires to put more in new NAND core (now only BBT included).
>> I'd like to send this serie out first, then we can decide
>> which part should be in new NAND core.
>>
>> This serie only supports basic SPI NAND features and uses
>> generic spi controller for data transfer, on-die ECC for data
>> correction. Support advanced features and specific SPI NAND
>> controller with hardware ECC is the next step.
>
> Can you please share on which SPI NAND chips this got tested?

Sorry for missing this part in cover letter... This series is tested on
Xilinx Zedboard with Micron MT29F2G01AAAED SPI NAND chip.

Thanks,
Peter Pan