[PATCH 3/7] watchdog: Add PTX1K I2CS BootFPGA watchdog driver.
Pantelis Antoniou
pantelis.antoniou at konsulko.com
Fri Oct 7 08:22:00 PDT 2016
From: Georgi Vlaev <gvlaev at juniper.net>
This driver allows using the I2CS watchdog on PTX1K. The
BootFPGA implements a watchdog that allows setting timeout
from predefined set of values from 15 msec to 491 sec.
Signed-off-by: Georgi Vlaev <gvlaev at juniper.net>
Signed-off-by: Guenter Roeck <groeck at juniper.net>
Signed-off-by: JawaharBalaji Thirumalaisamy <jawaharb at juniper.net>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.antoniou at konsulko.com>
---
drivers/watchdog/Kconfig | 15 +++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/jnx_ptx1kbf_wdt.c | 229 +++++++++++++++++++++++++++++++++++++
3 files changed, 245 insertions(+)
create mode 100644 drivers/watchdog/jnx_ptx1kbf_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 2554f47..a3761eb 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1033,6 +1033,21 @@ config IT87_WDT
To compile this driver as a module, choose M here: the module will
be called it87_wdt.
+config JNX_PTX1KBF_WDT
+ tristate "Juniper Networks PTX1000 I2CS BootFPGA Watchdog"
+ depends on X86 && MFD_JUNIPER_PTX1KBF
+ ---help---
+ This is the driver for the watchdog timer built-in on the Juniper
+ Networks PTX1000 I2CS/BootFPGA and acessible from the LPC bus. The
+ BootFPGA watchdog allows several predefined thresholds, so this
+ driver will select a value close to these static values: 15 ms,
+ 30 ms, 60 ms, 120 ms, 240 ms, 480 ms, 960 ms, 1920 ms, 3840 ms,
+ 7680 ms, 15360 ms, 30720 ms, 61440 ms, 122880 ms, 245760 ms and
+ 516096 ms.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jnx_ptx1kbf_wdt.
+
config HP_WATCHDOG
tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
depends on X86 && PCI
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 942b795..f9fafdf 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -111,6 +111,7 @@ endif
obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
obj-$(CONFIG_IT87_WDT) += it87_wdt.o
obj-$(CONFIG_JNX_PTXPMB_WDT) += ptxpmb_wdt.o
+obj-$(CONFIG_JNX_PTX1KBF_WDT) += jnx_ptx1kbf_wdt.o
obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
obj-$(CONFIG_KEMPLD_WDT) += kempld_wdt.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
diff --git a/drivers/watchdog/jnx_ptx1kbf_wdt.c b/drivers/watchdog/jnx_ptx1kbf_wdt.c
new file mode 100644
index 0000000..7d3e0b7
--- /dev/null
+++ b/drivers/watchdog/jnx_ptx1kbf_wdt.c
@@ -0,0 +1,229 @@
+/*
+ * Juniper Networks PTX1K RCB I2CS Boot FPGA watchdog driver
+ *
+ * Copyright (C) 2014 Juniper Networks. All rights reserved.
+ * Author: Georgi Vlaev <gvlaev at juniper.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/watchdog.h>
+#include <linux/mfd/ptx1k-bootfpga.h>
+
+#define WDT_MIN_TIMEOUT 1
+#define WDT_MAX_TIMEOUT 491
+#define WDT_DEFAULT_TIMEOUT 60 /* default heartbeat in seconds */
+
+#define DRVNAME "jnx-ptx1kbf-wdt"
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+
+#define MSW_NOWAYOUT __MODULE_STRING(WATCHDOG_NOWAYOUT)
+MODULE_PARM_DESC(nowayout,
+ "Cannot be stopped once started (def=" MSW_NOWAYOUT ")");
+
+struct ptx1kbf_wdt {
+ void __iomem *base;
+ struct watchdog_device wdt_dev;
+};
+
+/*
+ * The BOOT_FPGA_WATCHDOG_TIMER_THRESHOLD register defines the watchdog
+ * timer thresholds in ms: 0x0 = 15 ms, 0x1 = 30 ms, ... 0xD = 122880 ms,
+ * 0xE = 245760 ms, 0xF = 492520 ms, or value = (2^index * 15)
+ */
+static int ptx1kbf_index_to_timeout(u8 reg)
+{
+ return ((1 << (reg & WTT_THRESHOLD_MASK)) * 15) / 1000;
+}
+
+static u8 ptx1kbf_timeout_to_index(unsigned int timeout)
+{
+ return fls(timeout * 1000 / 15) & WTT_THRESHOLD_MASK;
+}
+
+static int ptx1kbf_wdt_set_timeout(struct watchdog_device *wdt_dev,
+ unsigned int timeout)
+{
+ struct ptx1kbf_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+ u8 reg, index;
+
+ if (timeout > WDT_MAX_TIMEOUT)
+ return -EINVAL;
+
+ index = ptx1kbf_timeout_to_index(timeout);
+
+ reg = ioread8(wdt->base + BOOT_FPGA_WATCHDOG_TIMER_THRESHOLD);
+ reg &= ~WTT_THRESHOLD_MASK;
+ reg |= index;
+ iowrite8(reg, wdt->base + BOOT_FPGA_WATCHDOG_TIMER_THRESHOLD);
+
+ /* Set the actual timeout supported by the watchdog */
+ wdt->wdt_dev.timeout = ptx1kbf_index_to_timeout(index);
+
+ return 0;
+}
+
+static int ptx1kbf_wdt_ping(struct watchdog_device *wdt_dev)
+{
+ return ptx1kbf_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
+}
+
+static int ptx1kbf_wdt_start(struct watchdog_device *wdt_dev)
+{
+ struct ptx1kbf_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+ int ret;
+ u8 reg;
+
+ ret = ptx1kbf_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
+ if (ret < 0)
+ return ret;
+
+ reg = ioread8(wdt->base + BOOT_FPGA_BOOT_CONTROL);
+ reg |= BC_WDT_ENA;
+ iowrite8(reg, wdt->base + BOOT_FPGA_BOOT_CONTROL);
+
+ return 0;
+}
+
+static int ptx1kbf_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ struct ptx1kbf_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+ u8 reg;
+
+ reg = ioread8(wdt->base + BOOT_FPGA_BOOT_CONTROL);
+ reg &= ~BC_WDT_ENA;
+ iowrite8(reg, wdt->base + BOOT_FPGA_BOOT_CONTROL);
+
+ return 0;
+}
+
+static struct watchdog_info ptx1kbf_wdt_info = {
+ .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT |
+ WDIOF_MAGICCLOSE,
+ .identity = "PTX1K BootFPGA Watchdog",
+ .firmware_version = 0,
+};
+
+static const struct watchdog_ops ptx1kbf_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = ptx1kbf_wdt_start,
+ .stop = ptx1kbf_wdt_stop,
+ .ping = ptx1kbf_wdt_ping,
+ .set_timeout = ptx1kbf_wdt_set_timeout,
+};
+
+static int ptx1kbf_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct resource *res;
+ struct ptx1kbf_wdt *wdt;
+ u8 reset_reason1, reset_reason2;
+ unsigned int timeout;
+
+ wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ wdt->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(wdt->base))
+ return PTR_ERR(wdt->base);
+
+ platform_set_drvdata(pdev, wdt);
+ wdt->wdt_dev.info = &ptx1kbf_wdt_info;
+ wdt->wdt_dev.ops = &ptx1kbf_wdt_ops;
+ wdt->wdt_dev.min_timeout = WDT_MIN_TIMEOUT;
+ wdt->wdt_dev.max_timeout = WDT_MAX_TIMEOUT;
+ wdt->wdt_dev.timeout = WDT_DEFAULT_TIMEOUT;
+ wdt->wdt_dev.parent = &pdev->dev;
+
+ reset_reason1 = ioread8(wdt->base + BOOT_FPGA_RESET_REASON1);
+ reset_reason2 = ioread8(wdt->base + BOOT_FPGA_RESET_REASON2);
+ if (reset_reason1 & RR1_MSTR)
+ wdt->wdt_dev.bootstatus |= WDIOF_EXTERN1;
+ else if (reset_reason1 & RR1_BUTTON)
+ wdt->wdt_dev.bootstatus |= WDIOF_EXTERN2;
+ else if (reset_reason1 & RR1_WDOG)
+ wdt->wdt_dev.bootstatus |= WDIOF_CARDRESET;
+ else if (reset_reason1 & RR1_POWER_FAIL)
+ wdt->wdt_dev.bootstatus |= WDIOF_POWERUNDER;
+ else if (reset_reason1 & RR1_THERM_TRIP)
+ wdt->wdt_dev.bootstatus |= WDIOF_OVERHEAT;
+ else if (reset_reason1 & RR2_AUTO_POWER_OFF)
+ wdt->wdt_dev.bootstatus |= WDIOF_FANFAULT;
+
+ /* Report the FPGA/WDT version */
+ ptx1kbf_wdt_info.firmware_version =
+ ioread8(wdt->base + BOOT_FPGA_VERSION);
+
+ /*
+ * The PTX1K BIOS configures the timeout when the FPGA watchdog
+ * is enabled. Index values < 0x07 set thresholds bellow 1s,
+ * so we can ignore them
+ */
+ timeout = ptx1kbf_index_to_timeout(ioread8(wdt->base +
+ BOOT_FPGA_WATCHDOG_TIMER_THRESHOLD));
+
+ watchdog_init_timeout(&wdt->wdt_dev, timeout, &pdev->dev);
+ watchdog_set_nowayout(&wdt->wdt_dev, nowayout);
+ watchdog_set_drvdata(&wdt->wdt_dev, wdt);
+
+ /* Stop the watchdog if BIOS has enabled it */
+ ptx1kbf_wdt_stop(&wdt->wdt_dev);
+
+ ret = watchdog_register_device(&wdt->wdt_dev);
+ if (ret)
+ return ret;
+
+ dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)",
+ wdt->wdt_dev.timeout, nowayout);
+
+ return 0;
+}
+
+static int ptx1kbf_wdt_remove(struct platform_device *pdev)
+{
+ struct ptx1kbf_wdt *wdt = platform_get_drvdata(pdev);
+
+ watchdog_unregister_device(&wdt->wdt_dev);
+
+ return 0;
+}
+
+static const struct of_device_id ptx1kbf_wdt_of_ids[] = {
+ { .compatible = "jnx,ptx1kbf-wdt", NULL },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ptx1kbf_wdt_of_ids);
+
+static struct platform_driver ptx1kbf_wdt_driver = {
+ .probe = ptx1kbf_wdt_probe,
+ .remove = ptx1kbf_wdt_remove,
+ .driver = {
+ .name = DRVNAME,
+ .owner = THIS_MODULE,
+ .of_match_table = ptx1kbf_wdt_of_ids,
+ },
+};
+
+module_platform_driver(ptx1kbf_wdt_driver);
+
+MODULE_DESCRIPTION("Juniper Networks PTX1K RCB I2CS Boot FPGA watchdog driver");
+MODULE_AUTHOR("Georgi Vlaev <gvlaev at juniper.net>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRVNAME);
--
1.9.1
More information about the linux-mtd
mailing list