[PATCH 4/7] watchdog: ptx1kbf-wdt: Add ptx1kbf device tree bindings

[Pantelis Antoniou]

From: Georgi Vlaev <gvlaev at juniper.net>

Add binding document for the watchdog driver of PTX1K Boot FPGA.

Signed-off-by: Georgi Vlaev <gvlaev at juniper.net>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.antoniou at konsulko.com>
---
 .../devicetree/bindings/watchdog/jnx-ptx1kbf-wdt.txt    | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/jnx-ptx1kbf-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/jnx-ptx1kbf-wdt.txt b/Documentation/devicetree/bindings/watchdog/jnx-ptx1kbf-wdt.txt
new file mode 100644
index 0000000..0aa8086
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/jnx-ptx1kbf-wdt.txt
@@ -0,0 +1,17 @@
+Juniper's PTX1K Boot FPGA watchdog driver
+
+Required properties:
+
+- compatible:	Should be "jnx,ptx1kbf-wdt"
+
+Optional properties:
+
+- reg : Specifies base physical address and size of the registers. It is
+  optional since the MFD parent driver supplies it, but can be overridden.
+
+Example:
+
+wdt {
+	compatible = "jnx,ptx1kbf-wdt";
+	/* no properties defined */
+};
-- 
1.9.1