[PATCH v2 4/8] MTD: xway: remove endless loop

[Hauke Mehrtens]

From: John Crispin <john at phrozen.org>

The reset loop logic could run into a endless loop. Lets fix it as
requested.
http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html

Signed-off-by: John Crispin <john at phrozen.org>
Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 drivers/mtd/nand/xway_nand.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
index 346781a..61176c4 100644
--- a/drivers/mtd/nand/xway_nand.c
+++ b/drivers/mtd/nand/xway_nand.c
@@ -73,16 +73,22 @@ struct xway_nand_data {
 static void xway_reset_chip(struct nand_chip *chip)
 {
 	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
+	unsigned long timeout;
 	unsigned long flags;
 
 	nandaddr &= ~NAND_WRITE_ADDR;
 	nandaddr |= NAND_WRITE_CMD;
 
 	/* finish with a reset */
+	timeout = jiffies + msecs_to_jiffies(20);
+
 	spin_lock_irqsave(&ebu_lock, flags);
 	writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
-	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-		;
+	do {
+		if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+			break;
+		cond_resched();
+	} while (!time_after_eq(jiffies, timeout));
 	spin_unlock_irqrestore(&ebu_lock, flags);
 }
 
-- 
2.8.1