[PATCH] mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl

[Brian Norris]

On Mon, Aug 29, 2016 at 11:59:30AM +0200, Boris Brezillon wrote:
> On Mon, 29 Aug 2016 07:45:49 +0000
> Karl Beldan <kbeldan at baylibre.com> wrote:
> 
> > This fixes subpage writes when using 4-bit HW ECC.
> > 
> > There has been numerous reports about ECC errors with devices using this
> > driver for a while.  Also the 4-bit ECC has been reported as broken with
> > subpages in [1] and with 16 bits NANDs in the driver and in mach* board
> > files both in mainline and in the vendor BSPs.
> > 
> > What I saw with 4-bit ECC on a 16bits NAND (on an LCDK) which got me to
> > try reinitializing the ECC engine:
> > - R/W on whole pages properly generates/checks RS code
> > - try writing the 1st subpage only of a blank page, the subpage is well
> >   written and the RS code properly generated, re-reading the same page
> >   the HW detects some ECC error, reading the same page again no ECC
> >   error is detected
> > 
> > Note that the ECC engine is already reinitialized in the 1-bit case.
> > 
> > Tested on my LCDK with UBI+UBIFS using subpages.
> > This could potentially get rid of the issue workarounded in [1].
> > 
> > [1] 28c015a9daab ("mtd: davinci-nand: disable subpage write for keystone-nand")
> > 
> > Signed-off-by: Karl Beldan <kbeldan at baylibre.com>
> 
> Acked-by: Boris Brezillon <boris.brezillon at free-electrons.com>
> 
> Brian, can you take this patch directly in your tree. If that's not
> possible, let me know, I'll add the Fixes and Cc:stable tags and take
> it for 4.9.

Would this be correct?

Fixes: 6a4123e581b3 ("mtd: nand: davinci_nand, 4-bit ECC for smallpage")

Brian