[PATCH v5 1/3] mtd: nand: gpmi: add gpmi_move_bits function

[Boris Brezillon]

Hi Brian,

On Sun, 30 Nov 2014 00:11:10 -0800
Brian Norris <computersforpeace at gmail.com> wrote:

> On Wed, Nov 26, 2014 at 05:57:08PM +0100, Boris Brezillon wrote:
> > On Wed, 26 Nov 2014 17:53:11 +0100 Boris Brezillon <boris.brezillon at free-electrons.com> wrote:
> > > +/**
> > > + * gpmi_move_bits - move bits from one memory region to another
> > > + * @dst: destination buffer
> > > + * @dst_bit_off: bit offset we're starting to write at
> > > + * @src: source buffer
> > > + * @src_bit_off: bit offset we're starting to read from
> > > + * @nbits: number of bits to copy
> > > + *
> > > + * This functions copies bits from one memory region to another, and is used by
> > > + * the GPMI driver to copy ECC sections which are not guaranteed to be byte
> > > + * aligned.
> > 
> > I forgot to add that src and dst should not overlap, otherwise it won't
> > work...
> 
> Hmm, normally that's implied for copy-like operations. But since you
> named this function "move" (rather than "copy" or "cpy"), that's a
> little less clear.

Indeed, that's a good point.

> 
> Did you have a good reason for the "move" name? If not, maybe it's worth
> changing.

No, I don't, and I'd prefer changing the name than implementing a non
destructive move function.

I'll send a new version with this change.

Thanks,

Boris

-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com