[PATCH v5 1/3] mtd: nand: gpmi: add gpmi_move_bits function

[Brian Norris]

On Wed, Nov 26, 2014 at 05:57:08PM +0100, Boris Brezillon wrote:
> On Wed, 26 Nov 2014 17:53:11 +0100 Boris Brezillon <boris.brezillon at free-electrons.com> wrote:
> > +/**
> > + * gpmi_move_bits - move bits from one memory region to another
> > + * @dst: destination buffer
> > + * @dst_bit_off: bit offset we're starting to write at
> > + * @src: source buffer
> > + * @src_bit_off: bit offset we're starting to read from
> > + * @nbits: number of bits to copy
> > + *
> > + * This functions copies bits from one memory region to another, and is used by
> > + * the GPMI driver to copy ECC sections which are not guaranteed to be byte
> > + * aligned.
> 
> I forgot to add that src and dst should not overlap, otherwise it won't
> work...

Hmm, normally that's implied for copy-like operations. But since you
named this function "move" (rather than "copy" or "cpy"), that's a
little less clear.

Did you have a good reason for the "move" name? If not, maybe it's worth
changing.

Brian