[PATCH] Drivers: MTD: Fixed checkpatch seq_printf warnings

Samarth Parikh samarthp at ymail.com
Mon Jul 21 11:49:30 PDT 2014


Fixed checkpatch warnings: "WARNING: Prefer seq_puts to seq_printf"




This patch is created with reference to the ongoing lkml thread
https://lkml.org/lkml/2014/7/15/646
where Andrew Morton wrote:

"
- puts is presumably faster

- puts doesn't go rogue if you accidentally pass it a "%".

- this patch would actually make compiled object files few bytes smaller.
  Perhaps because seq_printf() is a varargs function, forcing the
  caller to pass args on the stack instead of in registers.
"

Signed-off-by: Samarth Parikh <samarthp at ymail.com>
---
drivers/mtd/devices/docg3.c | 26 +++++++++++++-------------
drivers/mtd/mtdswap.c       |  4 ++--
2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 91a169c..21cc4b6 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -1697,16 +1697,16 @@ static int dbg_asicmode_show(struct seq_file *s, void *p)

    switch (mode) {
    case DOC_ASICMODE_RESET:
-        pos += seq_printf(s, "reset");
+        pos += seq_puts(s, "reset");
        break;
    case DOC_ASICMODE_NORMAL:
-        pos += seq_printf(s, "normal");
+        pos += seq_puts(s, "normal");
        break;
    case DOC_ASICMODE_POWERDOWN:
-        pos += seq_printf(s, "powerdown");
+        pos += seq_puts(s, "powerdown");
        break;
    }
-    pos += seq_printf(s, ")\n");
+    pos += seq_puts(s, ")\n");
    return pos;
}
DEBUGFS_RO_ATTR(asic_mode, dbg_asicmode_show);
@@ -1745,22 +1745,22 @@ static int dbg_protection_show(struct seq_file *s, void *p)
    pos += seq_printf(s, "Protection = 0x%02x (",
             protect);
    if (protect & DOC_PROTECT_FOUNDRY_OTP_LOCK)
-        pos += seq_printf(s, "FOUNDRY_OTP_LOCK,");
+        pos += seq_puts(s, "FOUNDRY_OTP_LOCK,");
    if (protect & DOC_PROTECT_CUSTOMER_OTP_LOCK)
-        pos += seq_printf(s, "CUSTOMER_OTP_LOCK,");
+        pos += seq_puts(s, "CUSTOMER_OTP_LOCK,");
    if (protect & DOC_PROTECT_LOCK_INPUT)
-        pos += seq_printf(s, "LOCK_INPUT,");
+        pos += seq_puts(s, "LOCK_INPUT,");
    if (protect & DOC_PROTECT_STICKY_LOCK)
-        pos += seq_printf(s, "STICKY_LOCK,");
+        pos += seq_puts(s, "STICKY_LOCK,");
    if (protect & DOC_PROTECT_PROTECTION_ENABLED)
-        pos += seq_printf(s, "PROTECTION ON,");
+        pos += seq_puts(s, "PROTECTION ON,");
    if (protect & DOC_PROTECT_IPL_DOWNLOAD_LOCK)
-        pos += seq_printf(s, "IPL_DOWNLOAD_LOCK,");
+        pos += seq_puts(s, "IPL_DOWNLOAD_LOCK,");
    if (protect & DOC_PROTECT_PROTECTION_ERROR)
-        pos += seq_printf(s, "PROTECT_ERR,");
+        pos += seq_puts(s, "PROTECT_ERR,");
    else
-        pos += seq_printf(s, "NO_PROTECT_ERR");
-    pos += seq_printf(s, ")\n");
+        pos += seq_puts(s, "NO_PROTECT_ERR");
+    pos += seq_puts(s, ")\n");

    pos += seq_printf(s, "DPS0 = 0x%02x : "
             "Protected area [0x%x - 0x%x] : OTP=%d, READ=%d, "
diff --git a/drivers/mtd/mtdswap.c b/drivers/mtd/mtdswap.c
index 8b33b26..0ec96cd 100644
--- a/drivers/mtd/mtdswap.c
+++ b/drivers/mtd/mtdswap.c
@@ -1287,7 +1287,7 @@ static int mtdswap_show(struct seq_file *s, void *data)

    seq_printf(s, "total erasures: %lu\n", sum);

-    seq_printf(s, "\n");
+    seq_puts(s, "\n");

    seq_printf(s, "mtdswap_readsect count: %llu\n", d->sect_read_count);
    seq_printf(s, "mtdswap_writesect count: %llu\n", d->sect_write_count);
@@ -1296,7 +1296,7 @@ static int mtdswap_show(struct seq_file *s, void *data)
    seq_printf(s, "mtd write count: %llu\n", d->mtd_write_count);
    seq_printf(s, "discarded pages count: %llu\n", d->discard_page_count);

-    seq_printf(s, "\n");
+    seq_puts(s, "\n");
    seq_printf(s, "total pages: %u\n", pages);
    seq_printf(s, "pages mapped: %u\n", mapped);

--
1.9.1



More information about the linux-mtd mailing list