[PATCH RFC v3 0/4] Add arm pl353 smc nand driver for xilinx zynq soc

[punnaiah choudary kalluri]

Hi Brian and Pekon,

  Do you have any further comments for this nand driver?


Regards,
Punnaiah

On Fri, Jun 27, 2014 at 8:33 AM, Punnaiah Choudary Kalluri
<punnaiah.choudary.kalluri at xilinx.com> wrote:
> The following patches add arm pl353 static memory controller driver for
> xilinx zynq soc. The arm pl353 smc supports two interfaces i.e nand and
> nor/sram memory interfaces. The current implementation supports only a
> single SMC instance and nand specific configuration.
>
> xilinx zynq TRM link:
> http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf
>
> ARM pl353 smc TRM link:
> http://infocenter.arm.com/help/topic/com.arm.doc.ddi0380g/
> DDI0380G_smc_pl350_series_r2p1_trm.pdf
>
> Punnaiah Choudary Kalluri (4):
>   nand: pl353: Add basic driver for arm pl353 smc nand interface
>   nand: pl353: Add software ecc support
>   nand: pl353: Add ONDIE ECC support
>   Documentation: nand: pl353: Add documentation for controller and
>     driver
>
>  Documentation/mtd/nand/pl353-nand.txt |   92 +++
>  drivers/mtd/nand/Kconfig              |    7 +
>  drivers/mtd/nand/Makefile             |    1 +
>  drivers/mtd/nand/pl353_nand.c         | 1141 +++++++++++++++++++++++++++++++++
>  4 files changed, 1241 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/mtd/nand/pl353-nand.txt
>  create mode 100644 drivers/mtd/nand/pl353_nand.c
>
> --
> 1.7.4
>
>