[PATCH v3 3/6] mtd: set the ecc step size for master/slave mtd_info

[Huang Shijie]

于 2013年08月12日 15:00, Gupta, Pekon 写道:
>> Set the ecc step size for master/slave mtd_info{}.
>>
>> Signed-off-by: Huang Shijie<b32955 at freescale.com>
>> ---
>>   drivers/mtd/mtdpart.c        |    1 +
>>   drivers/mtd/nand/nand_base.c |    1 +
>>   2 files changed, 2 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
>> index 3014933..63b42a6 100644
>> --- a/drivers/mtd/mtdpart.c
>> +++ b/drivers/mtd/mtdpart.c
>> @@ -516,6 +516,7 @@ static struct mtd_part *allocate_partition(struct
>> mtd_info *master,
>>   	}
>>
>>   	slave->mtd.ecclayout = master->ecclayout;
>> +	slave->mtd.ecc_step = master->ecc_step;
>>   	slave->mtd.ecc_strength = master->ecc_strength;
>>   	slave->mtd.bitflip_threshold = master->bitflip_threshold;
>>
>> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
>> index 8f04fb0..6e4095d 100644
>> --- a/drivers/mtd/nand/nand_base.c
>> +++ b/drivers/mtd/nand/nand_base.c
>> @@ -3788,6 +3788,7 @@ int nand_scan_tail(struct mtd_info *mtd)
>>   	/* propagate ecc info to mtd_info */
>>   	mtd->ecclayout = chip->ecc.layout;
>>   	mtd->ecc_strength = chip->ecc.strength;
>> +	mtd->ecc_step = chip->ecc.size;
> [Pekon]: Sorry for noticing this lately..
> But do you really want to name ecc.*size* as *ecc_step* ?
Please see :
http://lists.infradead.org/pipermail/linux-mtd/2013-May/046928.html

Artem thought the ecc_step is more proper.


> Wouldn't it be better to follow same nomenclature everywhere ?
> Like ' mtd->ecc_size = chip.ecc.size;'
>
> Because we also have ecc.steps as another parameter here.
there is no need to expose the ecc.steps to use space.

Since the user can get the ecc_step, and pagesize, they can get the 
ecc.steps by:
(pagesize / ecc_step).

thanks
Huang Shijie
> And someone might want to expose it in user-space later.
> (Just a naming change requested here to keep things in sync..)