[PATCH V5 5/6] pxa3xx_nand: mtd scan id process could be defined by driver itself
Lei Wen
leiwen at marvell.com
Fri Jul 8 15:48:14 EDT 2011
Different NAND driver may require its unique detection. For pxa3xx_nand,
it use its self id database to get the necessary info.
Signed-off-by: Lei Wen <leiwen at marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
Cc: Eric Miao <eric.y.miao at gmail.com>
Cc: David Woodhouse <dwmw2 at infradead.org>
Cc: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 216 +++++++++++++++++++++++-----------------
1 files changed, 123 insertions(+), 93 deletions(-)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index de0a2a2..bb50cf2 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -123,6 +123,7 @@ enum {
struct pxa3xx_nand_info {
struct nand_chip nand_chip;
+ struct nand_hw_control controller;
struct platform_device *pdev;
struct pxa3xx_nand_cmdset *cmdset;
@@ -157,6 +158,7 @@ struct pxa3xx_nand_info {
int use_ecc; /* use HW ECC ? */
int use_dma; /* use DMA ? */
+ int is_ready;
unsigned int page_size; /* page size of attached chip */
unsigned int data_size; /* data size in FIFO */
@@ -223,6 +225,8 @@ static struct pxa3xx_nand_flash builtin_flash_types[] = {
/* Define a default flash type setting serve as flash detecting only */
#define DEFAULT_FLASH_TYPE (&builtin_flash_types[0])
+const char *mtd_names[] = {"pxa3xx_nand-0", NULL};
+
#define NDTR0_tCH(c) (min((c), 7) << 19)
#define NDTR0_tCS(c) (min((c), 7) << 16)
#define NDTR0_tWH(c) (min((c), 7) << 11)
@@ -437,8 +441,10 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
info->state = STATE_CMD_DONE;
is_completed = 1;
}
- if (status & NDSR_FLASH_RDY)
+ if (status & NDSR_FLASH_RDY) {
+ info->is_ready = 1;
info->state = STATE_READY;
+ }
if (status & NDSR_WRCMDREQ) {
nand_writel(info, NDSR, NDSR_WRCMDREQ);
@@ -483,10 +489,11 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
exec_cmd = 1;
/* reset data and oob column point to handle data */
- info->buf_start = 0;
- info->buf_count = 0;
+ info->buf_start = 0;
+ info->buf_count = 0;
info->oob_size = 0;
info->use_ecc = 0;
+ info->is_ready = 0;
info->retcode = ERR_NONE;
switch (command) {
@@ -849,42 +856,6 @@ static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
return 0;
}
-static int pxa3xx_nand_detect_flash(struct pxa3xx_nand_info *info,
- const struct pxa3xx_nand_platform_data *pdata)
-{
- const struct pxa3xx_nand_flash *f;
- uint32_t id = -1;
- int i;
-
- if (pdata->keep_config)
- if (pxa3xx_nand_detect_config(info) == 0)
- return 0;
-
- /* we use default timing to detect id */
- f = DEFAULT_FLASH_TYPE;
- pxa3xx_nand_config_flash(info, f);
- pxa3xx_nand_cmdfunc(info->mtd, NAND_CMD_READID, 0, 0);
- id = *((uint16_t *)(info->data_buff));
-
- for (i=0; i<ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1; i++) {
- /* we first choose the flash definition from platfrom */
- if (i < pdata->num_flash)
- f = pdata->flash + i;
- else
- f = &builtin_flash_types[i - pdata->num_flash + 1];
- if (f->chip_id == id) {
- dev_info(&info->pdev->dev, "detect chip id: 0x%x\n", id);
- pxa3xx_nand_config_flash(info, f);
- return 0;
- }
- }
-
- dev_warn(&info->pdev->dev,
- "failed to detect configured nand flash; found %04x instead of\n",
- id);
- return -ENODEV;
-}
-
/* the maximum possible buffer size for large page with OOB data
* is: 2048 + 64 = 2112 bytes, allocate a page here for both the
* data buffer and the DMA descriptor
@@ -926,57 +897,110 @@ static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
return 0;
}
-static struct nand_ecclayout hw_smallpage_ecclayout = {
- .eccbytes = 6,
- .eccpos = {8, 9, 10, 11, 12, 13 },
- .oobfree = { {2, 6} }
-};
+static int pxa3xx_nand_sensing(struct pxa3xx_nand_info *info)
+{
+ struct mtd_info *mtd = info->mtd;
+ struct nand_chip *chip = mtd->priv;
-static struct nand_ecclayout hw_largepage_ecclayout = {
- .eccbytes = 24,
- .eccpos = {
- 40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63},
- .oobfree = { {2, 38} }
-};
+ /* use the common timing to make a try */
+ pxa3xx_nand_config_flash(info, &builtin_flash_types[0]);
+ chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
+ if (info->is_ready)
+ return 1;
+ else
+ return 0;
+}
-static void pxa3xx_nand_init_mtd(struct mtd_info *mtd,
- struct pxa3xx_nand_info *info)
+static int pxa3xx_nand_scan(struct mtd_info *mtd)
{
- struct nand_chip *this = &info->nand_chip;
-
- this->options = (info->reg_ndcr & NDCR_DWIDTH_C) ? NAND_BUSWIDTH_16: 0;
- this->options |= NAND_NO_AUTOINCR;
-
- this->waitfunc = pxa3xx_nand_waitfunc;
- this->select_chip = pxa3xx_nand_select_chip;
- this->dev_ready = pxa3xx_nand_dev_ready;
- this->cmdfunc = pxa3xx_nand_cmdfunc;
- this->ecc.read_page = pxa3xx_nand_read_page_hwecc;
- this->ecc.write_page = pxa3xx_nand_write_page_hwecc;
- this->read_word = pxa3xx_nand_read_word;
- this->read_byte = pxa3xx_nand_read_byte;
- this->read_buf = pxa3xx_nand_read_buf;
- this->write_buf = pxa3xx_nand_write_buf;
- this->verify_buf = pxa3xx_nand_verify_buf;
-
- this->ecc.mode = NAND_ECC_HW;
- this->ecc.size = info->page_size;
-
- if (info->page_size == 2048)
- this->ecc.layout = &hw_largepage_ecclayout;
- else
- this->ecc.layout = &hw_smallpage_ecclayout;
+ struct pxa3xx_nand_info *info = mtd->priv;
+ struct platform_device *pdev = info->pdev;
+ struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
+ const struct pxa3xx_nand_flash *f = NULL;
+ struct nand_chip *chip = mtd->priv;
+ uint32_t id = -1;
+ int i, ret, num;
+
+ if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
+ return 0;
+
+ ret = pxa3xx_nand_sensing(info);
+ if (!ret) {
+ kfree(mtd);
+ info->mtd = NULL;
+ printk(KERN_INFO "There is no nand chip on cs 0!\n");
+
+ return -EINVAL;
+ }
+
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0, 0);
+ id = *((uint16_t *)(info->data_buff));
+ if (id != 0)
+ printk(KERN_INFO "Detect a flash id %x\n", id);
+ else {
+ kfree(mtd);
+ info->mtd = NULL;
+ printk(KERN_WARNING "Read out ID 0, potential timing set wrong!!\n");
+
+ return -EINVAL;
+ }
+
+ num = ARRAY_SIZE(builtin_flash_types) + pdata->num_flash - 1;
+ for (i = 0; i < num; i++) {
+ if (i < pdata->num_flash)
+ f = pdata->flash + i;
+ else
+ f = &builtin_flash_types[i - pdata->num_flash + 1];
+
+ /* find the chip in default list */
+ if (f->chip_id == id) {
+ pxa3xx_nand_config_flash(info, f);
+ mtd->writesize = f->page_size;
+ mtd->writesize_shift = ffs(mtd->writesize) - 1;
+ mtd->writesize_mask = (1 << mtd->writesize_shift) - 1;
+ mtd->oobsize = mtd->writesize / 32;
+ mtd->erasesize = f->page_size * f->page_per_block;
+ mtd->erasesize_shift = ffs(mtd->erasesize) - 1;
+ mtd->erasesize_mask = (1 << mtd->erasesize_shift) - 1;
+
+ mtd->name = mtd_names[0];
+ break;
+ }
+ }
+
+ if (i >= (ARRAY_SIZE(builtin_flash_types) + pdata->num_flash)) {
+ kfree(mtd);
+ info->mtd = NULL;
+ printk(KERN_ERR "ERROR!! flash not defined!!!\n");
+
+ return -EINVAL;
+ }
+
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = f->page_size;
+ chip->chipsize = (uint64_t)f->num_blocks * f->page_per_block
+ * f->page_size;
+ mtd->size = chip->chipsize;
+
+ /* Calculate the address shift from the page size */
+ chip->page_shift = ffs(mtd->writesize) - 1;
+ chip->pagemask = mtd_div_by_ws(chip->chipsize, mtd) - 1;
+ chip->numchips = 1;
+ chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
+ chip->bbt_erase_shift = chip->phys_erase_shift;
+
+ chip->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16 : 0;
+ chip->options |= NAND_NO_AUTOINCR;
+ chip->options |= NAND_NO_READRDY;
- this->chip_delay = 25;
+ return nand_scan_tail(mtd);
}
static
struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
{
- struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
struct pxa3xx_nand_info *info;
+ struct nand_chip *chip;
struct mtd_info *mtd;
struct resource *r;
int ret, irq;
@@ -989,12 +1013,27 @@ struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
}
info = (struct pxa3xx_nand_info *)(&mtd[1]);
+ chip = (struct nand_chip *)(&mtd[1]);
info->pdev = pdev;
-
- mtd->priv = info;
info->mtd = mtd;
+ mtd->priv = info;
mtd->owner = THIS_MODULE;
+ chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
+ chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
+ chip->controller = &info->controller;
+ chip->waitfunc = pxa3xx_nand_waitfunc;
+ chip->select_chip = pxa3xx_nand_select_chip;
+ chip->dev_ready = pxa3xx_nand_dev_ready;
+ chip->cmdfunc = pxa3xx_nand_cmdfunc;
+ chip->read_word = pxa3xx_nand_read_word;
+ chip->read_byte = pxa3xx_nand_read_byte;
+ chip->read_buf = pxa3xx_nand_read_buf;
+ chip->write_buf = pxa3xx_nand_write_buf;
+ chip->verify_buf = pxa3xx_nand_verify_buf;
+
+ spin_lock_init(&chip->controller->lock);
+ init_waitqueue_head(&chip->controller->wq);
info->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(info->clk)) {
dev_err(&pdev->dev, "failed to get nand clock\n");
@@ -1062,21 +1101,12 @@ struct pxa3xx_nand_info *alloc_nand_resource(struct platform_device *pdev)
goto fail_free_buf;
}
- ret = pxa3xx_nand_detect_flash(info, pdata);
- if (ret) {
- dev_err(&pdev->dev, "failed to detect flash\n");
- ret = -ENODEV;
- goto fail_free_irq;
- }
-
- pxa3xx_nand_init_mtd(mtd, info);
platform_set_drvdata(pdev, info);
return info;
-fail_free_irq:
- free_irq(irq, info);
fail_free_buf:
+ free_irq(irq, info);
if (use_dma) {
pxa_free_dma(info->data_dma_ch);
dma_free_coherent(&pdev->dev, info->data_buff_size,
@@ -1146,7 +1176,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
if (info == NULL)
return -ENOMEM;
- if (nand_scan(info->mtd, 1)) {
+ if (pxa3xx_nand_scan(info->mtd)) {
dev_err(&pdev->dev, "failed to scan nand\n");
pxa3xx_nand_remove(pdev);
return -ENODEV;
--
1.7.0.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-mtd
mailing list