SV: [PATCH 4/5] CRIS: stop checking for MTD_CONCAT

[Mikael Starvik]

Agreed.

Signed-off-by: Mikael Starvik starvik at axis.com

________________________________________
Från: Dmitry Eremin-Solenikov [dbaryshkov at gmail.com]
Skickat: den 11 januari 2011 12:33
Till: David Woodhouse
Kopia: Stefan Roese; linux-mtd at lists.infradead.org; linux-cris-kernel; Artem Bityutskiy
Ämne: [PATCH 4/5] CRIS: stop checking for MTD_CONCAT

As MTD_CONCAT support is becoming an integral part of MTD core,
there is no need for it's special treatment. So stop checking for
MTD_CONCAT availability.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>
Cc: Artem Bityutskiy <dedekind1 at gmail.com>
Cc: Stefan Roese <sr at denx.de>
Cc: linux-cris-kernel at axis.com
---
 arch/cris/Kconfig                         |    1 -
 arch/cris/arch-v10/drivers/axisflashmap.c |    6 ------
 arch/cris/arch-v32/drivers/Kconfig        |    1 -
 arch/cris/arch-v32/drivers/axisflashmap.c |    6 ------
 4 files changed, 0 insertions(+), 14 deletions(-)

diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 613e628..e05bd2f 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -277,7 +277,6 @@ config ETRAX_AXISFLASHMAP
        select MTD_CHAR
        select MTD_BLOCK
        select MTD_PARTITIONS
-       select MTD_CONCAT
        select MTD_COMPLEX_MAPPINGS
        help
          This option enables MTD mapping of flash devices.  Needed to use
diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
index b207970..ed708e1 100644
--- a/arch/cris/arch-v10/drivers/axisflashmap.c
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -234,7 +234,6 @@ static struct mtd_info *flash_probe(void)
        }

        if (mtd_cse0 && mtd_cse1) {
-#ifdef CONFIG_MTD_CONCAT
                struct mtd_info *mtds[] = { mtd_cse0, mtd_cse1 };

                /* Since the concatenation layer adds a small overhead we
@@ -246,11 +245,6 @@ static struct mtd_info *flash_probe(void)
                 */
                mtd_cse = mtd_concat_create(mtds, ARRAY_SIZE(mtds),
                                            "cse0+cse1");
-#else
-               printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel "
-                      "(mis)configuration!\n", map_cse0.name, map_cse1.name);
-               mtd_cse = NULL;
-#endif
                if (!mtd_cse) {
                        printk(KERN_ERR "%s and %s: Concatenation failed!\n",
                               map_cse0.name, map_cse1.name);
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index a2dd740..1633b12 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -406,7 +406,6 @@ config ETRAX_AXISFLASHMAP
        select MTD_CHAR
        select MTD_BLOCK
        select MTD_PARTITIONS
-       select MTD_CONCAT
        select MTD_COMPLEX_MAPPINGS
        help
          This option enables MTD mapping of flash devices.  Needed to use
diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c
index 51e1e85..3d75125 100644
--- a/arch/cris/arch-v32/drivers/axisflashmap.c
+++ b/arch/cris/arch-v32/drivers/axisflashmap.c
@@ -275,7 +275,6 @@ static struct mtd_info *flash_probe(void)
        }

        if (count > 1) {
-#ifdef CONFIG_MTD_CONCAT
                /* Since the concatenation layer adds a small overhead we
                 * could try to figure out if the chips in cse0 and cse1 are
                 * identical and reprobe the whole cse0+cse1 window. But since
@@ -284,11 +283,6 @@ static struct mtd_info *flash_probe(void)
                 * complicating the probing procedure.
                 */
                mtd_total = mtd_concat_create(mtds, count, "cse0+cse1");
-#else
-               printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel "
-                      "(mis)configuration!\n", map_cse0.name, map_cse1.name);
-               mtd_toal = NULL;
-#endif
                if (!mtd_total) {
                        printk(KERN_ERR "%s and %s: Concatenation failed!\n",
                                map_cse0.name, map_cse1.name);
--
1.7.2.3


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/