[i.MX28 GPMI] problem overwriting all-0xff data in NAND

Shawn Guo shawn.guo at freescale.com
Mon Jul 18 12:43:55 EDT 2011


On Mon, Jul 18, 2011 at 03:13:27PM +0200, Lothar Waßmann wrote:
> Hi,
> 
> with the gpmi-nfc driver for imx28 from Shawn Guo on a TX28 I

To be clear, the author of gpmi-nfc driver is Huang Shijie (Cc-ed).

Regards,
Shawn

> encountered some problems with jffs2 when overwriting pages that have
> been written with 0xff (e.g. from padding from the file system image
> file).
> 
> The problem is that the ECC info for an all-0xff block is not all-0xff
> and thus a newly erased block is different from a block that has been
> written with 0xff.
> If such a block is being altered (jffs2 thinking it can simply
> overwrite it without erasing first) the ECC information will be
> corrupted and will produce ECC errors upon read.
> 
> The only remedy I can think of is to prevent empty pages from actually
> being written to flash, but leaving them in the erased state instead.
> 
> Any comments?
> 
> 
> Lothar Waßmann
> -- 
> ___________________________________________________________
> 
> Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
> Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
> Geschäftsführer: Matthias Kaussen
> Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
> 
> www.karo-electronics.de | info at karo-electronics.de
> ___________________________________________________________
> 




More information about the linux-mtd mailing list