[PATCH v3] mtd/nand : workaround for Freescale FCM to support large-page Nand chip

[Artem Bityutskiy]

On Fri, 2011-08-19 at 13:10 -0500, Scott Wood wrote:
> On 08/19/2011 03:57 AM, Matthieu CASTET wrote:
> > LiuShuo a écrit :
> >> 于 2011年08月19日 01:00, Matthieu CASTET 写道:
> >>> b35362 at freescale.com a écrit :
> >>>> From: Liu Shuo<b35362 at freescale.com>
> >>>>
> >>>> Freescale FCM controller has a 2K size limitation of buffer RAM. In order
> >>>> to support the Nand flash chip whose page size is larger than 2K bytes,
> >>>> we divide a page into multi-2K pages for MTD layer driver. In that case,
> >>>> we force to set the page size to 2K bytes. We convert the page address of
> >>>> MTD layer driver to a real page address in flash chips and a column index
> >>>> in fsl_elbc driver. We can issue any column address by UA instruction of
> >>>> elbc controller.
> >>>>
> >>> Why do you need to do that ?
> >>>
> >>> When mtd send you a 4k page, why can't you write it by 2*2k pages write ?
> >> 1. It's easy to implement.
> >> 2. We don't need to move the data in buffer more times, because we
> >> want to use the HW_ECC.
> >>
> >> In flash chip per Page:
> >> ----------------------------------------------------------------
> >> | first data | first oob | second data | second oob |
> >> ----------------------------------------------------------------
> > How the bad block marker are handled with this remapping ?
> 
> It has to be migrated prior to first use (this needs to be documented,
> and ideally a U-Boot command provided do do this), or else special
> handling would be needed when building the BBT.  The only way around
> this would be to do ECC in software, and do the buffering needed to let
> MTD treat it as a 4K chip.

It really feels like a special hack which would better not go to
mainline - am I the only one with such feeling? If yes, probably I am
wrong...

-- 
Best Regards,
Artem Bityutskiy