[PATCH 1/2] P4080/eLBC: Make Freescale elbc interrupt common to elbc devices
r61911 at freescale.com
Wed Oct 20 01:12:20 EDT 2010
> -----Original Message-----
> From: Kumar Gala [mailto:galak at kernel.crashing.org]
> Sent: Tuesday, October 19, 2010 21:19 PM
> To: Zang Roy-R61911
> Cc: linux-mtd at lists.infradead.org; Wood Scott-B07421;
dedekind1 at gmail.com; Lan
> Chunhe-B25806; linuxppc-dev at ozlabs.org; akpm at linux-foundation.org;
> dwmw2 at infradead.org; Gala Kumar-B11780
> Subject: Re: [PATCH 1/2] P4080/eLBC: Make Freescale elbc interrupt
> elbc devices
> On Oct 18, 2010, at 2:22 AM, Roy Zang wrote:
> > Move Freescale elbc interrupt from nand dirver to elbc driver.
> > Then all elbc devices can use the interrupt instead of ONLY nand.
> > For former nand driver, it had the two functions:
> > 1. detecting nand flash partitions;
> > 2. registering elbc interrupt.
> > Now, second function is removed to fsl_lbc.c.
> > Signed-off-by: Lan Chunhe-B25806 <b25806 at freescale.com>
> > Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
> > Reviewed-by: Anton Vorontsov <cbouatmailru at gmail.com>
> > Cc: Wood Scott-B07421 <B07421 at freescale.com>
> > ---
> Roy, this is a nit, but are these really p4080 specific? just
> the subject is P4080/eLBC:...
We start these code in P4080 project. Some customer want to track eLBC
error on P4080, but some of the code is limited in nand driver only ...
That is why P4080/eLBC ...
More information about the linux-mtd