[PATCH 3/3 -v3] MTD: Add nand_ecc test module

[Artem Bityutskiy]

On Wed, 2009-10-21 at 17:34 +0900, Akinobu Mita wrote:
> This module tests NAND ECC functions.
> 
> The test is simple.
> 
> 1. Create a 256 or 512 bytes block of data filled with random bytes (data)
> 2. Duplicate the data block and inject single bit error (error_data)
> 3. Try to correct error_data
> 4. Compare data and error_data
> 
> Signed-off-by: Akinobu Mita <akinobu.mita at gmail.com>
> Cc: David Woodhouse <dwmw2 at infradead.org>
> Cc: linux-mtd at lists.infradead.org
> Cc: Artem Bityutskiy <Artem.Bityutskiy at nokia.com>
> Cc: vimal singh <vimal.newwork at gmail.com>
> ---
>  drivers/mtd/tests/Makefile        |    1 +
>  drivers/mtd/tests/nand_ecc-test.c |   87 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 88 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/mtd/tests/nand_ecc-test.c

How about a consistent name for the test? All current tests have 'mtd_'
prefix. How about make the file to be 'mtd_ecctest.c' ?

Also, since you anyway need to use these "#defines", I think there is
not need to use this splitting. I apologize for leading you that way at
the beginning.

-- 
Best Regards,
Artem Bityutskiy (Артём Битюцкий)