[PATCH] mxc_nand : add RESET command support

[Eric Bénard]

mxc_nand driver must support the RESET Command in order to support 
Micron NAND which need a reset before any other command.

Signed-off-by: Eric Benard <eric at eukrea.com>
--
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index d5445cd..0207525 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -638,6 +638,7 @@ static void mxc_nand_command(struct mtd_info *mtd, 
unsigned command

         case NAND_CMD_ERASE1:
         case NAND_CMD_ERASE2:
+       case NAND_CMD_RESET:
                 send_cmd(host, command, false);
                 mxc_do_addr_cycle(mtd, column, page_addr);