[PATCH] Bug on atmel_nand HW ECC : OOB info not correctly written

[David Woodhouse]

On Sun, 2008-10-12 at 08:42 +0200, Richard Genoud wrote:
> The functions that write the OOB info (on hardware ECC only) use the
> HW_SYNDROME method.
> This is not correct : the start position is "pos = eccsize + chunk"
> and should be eccsize.
> So, the standard (nand_write_oob_std) function should be used.
> This patch corrects this by using NAND_ECC_HW instead of
> NAND_ECC_HW_SYNDROME.
> 
> This has only been tested on small pages nand flash.
> (if anyone can test it on large pages that would be great).
> 
> kernel version : 2.6.27-rc2 (current git mtd-2.6)
> 
> Signed-off-by: Richard Genoud <richard.genoud at gmail.com>

Håvard?

-- 
David Woodhouse                            Open Source Technology Centre
David.Woodhouse at intel.com                              Intel Corporation