[PATCH] [MTD] [OneNAND] Add OMAP2 / OMAP3 OneNAND driver

Adrian Hunter ext-adrian.hunter at nokia.com
Wed Aug 6 03:08:46 EDT 2008


This driver had resided in the OMAP tree but is now to be in MTD.

Original authors were:
	Jarkko Lavinen <jarkko.lavinen at nokia.com> and Juha Yrjola
	IRQ and DMA support written by Timo Teras

Signed-off-by: Adrian Hunter <ext-adrian.hunter at nokia.com>
---
 drivers/mtd/onenand/Kconfig         |    7 +
 drivers/mtd/onenand/Makefile        |    1 +
 drivers/mtd/onenand/omap2.c         |  777 +++++++++++++++++++++++++++++++++++
 include/asm-arm/arch-omap/onenand.h |    7 +-
 4 files changed, 791 insertions(+), 1 deletions(-)
 create mode 100644 drivers/mtd/onenand/omap2.c

diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig
index b94a61b..79fa79e 100644
--- a/drivers/mtd/onenand/Kconfig
+++ b/drivers/mtd/onenand/Kconfig
@@ -27,6 +27,13 @@ config MTD_ONENAND_GENERIC
 	help
 	  Support for OneNAND flash via platform device driver.
 
+config MTD_ONENAND_OMAP2
+	tristate "OneNAND on OMAP2/OMAP3 support"
+	depends on MTD_ONENAND && (ARCH_OMAP2 || ARCH_OMAP3)
+	help
+	  Support for a OneNAND flash device connected to an OMAP2/OMAP3 CPU
+	  via the GPMC memory controller.
+
 config MTD_ONENAND_OTP
 	bool "OneNAND OTP Support"
 	select HAVE_MTD_OTP
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index 4d2eacf..64b6cc6 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_MTD_ONENAND)		+= onenand.o
 
 # Board specific.
 obj-$(CONFIG_MTD_ONENAND_GENERIC)	+= generic.o
+obj-$(CONFIG_MTD_ONENAND_OMAP2)		+= omap2.o
 
 # Simulator
 obj-$(CONFIG_MTD_ONENAND_SIM)		+= onenand_sim.o
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
new file mode 100644
index 0000000..f279d89
--- /dev/null
+++ b/drivers/mtd/onenand/omap2.c
@@ -0,0 +1,777 @@
+/*
+ *  linux/drivers/mtd/onenand/omap2.c
+ *
+ *  OneNAND driver for OMAP2 / OMAP3
+ *
+ *  Copyright (C) 2005-2006 Nokia Corporation
+ *
+ *  Author: Jarkko Lavinen <jarkko.lavinen at nokia.com> and Juha Yrjola
+ *  IRQ and DMA support written by Timo Teras
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; see the file COPYING. If not, write to the Free Software
+ * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/mach/flash.h>
+#include <asm/arch/gpmc.h>
+#include <asm/arch/onenand.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/gpmc.h>
+#include <asm/arch/pm.h>
+
+#include <linux/dma-mapping.h>
+#include <asm/dma-mapping.h>
+#include <asm/arch/dma.h>
+
+#include <asm/arch/board.h>
+
+#define DRIVER_NAME "omap2-onenand"
+
+#define ONENAND_IO_SIZE		SZ_128K
+#define ONENAND_BUFRAM_SIZE	(1024 * 5)
+
+struct omap2_onenand {
+	struct platform_device *pdev;
+	int gpmc_cs;
+	unsigned long phys_base;
+	int gpio_irq;
+	struct mtd_info mtd;
+	struct mtd_partition *parts;
+	struct onenand_chip onenand;
+	struct completion irq_done;
+	struct completion dma_done;
+	int dma_channel;
+	int freq;
+	int (*setup)(void __iomem *base, int freq);
+};
+
+static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
+{
+	struct omap2_onenand *c = data;
+
+	complete(&c->dma_done);
+}
+
+static irqreturn_t omap2_onenand_interrupt(int irq, void *dev_id)
+{
+	struct omap2_onenand *c = dev_id;
+
+	complete(&c->irq_done);
+
+	return IRQ_HANDLED;
+}
+
+static inline unsigned short read_reg(struct omap2_onenand *c, int reg)
+{
+	return readw(c->onenand.base + reg);
+}
+
+static inline void write_reg(struct omap2_onenand *c, unsigned short value,
+			     int reg)
+{
+	writew(value, c->onenand.base + reg);
+}
+
+static void wait_err(char *msg, int state, unsigned int ctrl, unsigned int intr)
+{
+	printk(KERN_ERR "onenand_wait: %s! state %d ctrl 0x%04x intr 0x%04x\n",
+	       msg, state, ctrl, intr);
+}
+
+static void wait_warn(char *msg, int state, unsigned int ctrl,
+		      unsigned int intr)
+{
+	printk(KERN_WARNING "onenand_wait: %s! state %d ctrl 0x%04x "
+	       "intr 0x%04x\n", msg, state, ctrl, intr);
+}
+
+static int omap2_onenand_wait(struct mtd_info *mtd, int state)
+{
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+	unsigned int intr = 0;
+	unsigned int ctrl;
+	unsigned long timeout;
+	u32 syscfg;
+
+	if (state == FL_RESETING) {
+		int i;
+
+		for (i = 0; i < 20; i++) {
+			udelay(1);
+			intr = read_reg(c, ONENAND_REG_INTERRUPT);
+			if (intr & ONENAND_INT_MASTER)
+				break;
+		}
+		ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+		if (ctrl & ONENAND_CTRL_ERROR) {
+			wait_err("controller error", state, ctrl, intr);
+			return -EIO;
+		}
+		if (!(intr & ONENAND_INT_RESET)) {
+			wait_err("timeout", state, ctrl, intr);
+			return -EIO;
+		}
+		return 0;
+	}
+
+	if (state != FL_READING) {
+		int result;
+
+		/* Turn interrupts on */
+		syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
+		syscfg |= ONENAND_SYS_CFG1_IOBE;
+		write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
+
+		INIT_COMPLETION(c->irq_done);
+		if (c->gpio_irq) {
+			result = omap_get_gpio_datain(c->gpio_irq);
+			if (result == -1) {
+				ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+				intr = read_reg(c, ONENAND_REG_INTERRUPT);
+				wait_err("gpio error", state, ctrl, intr);
+				return -EIO;
+			}
+		} else
+			result = 0;
+		if (result == 0) {
+			int retry_cnt = 0;
+retry:
+			result = wait_for_completion_timeout(&c->irq_done,
+						    msecs_to_jiffies(20));
+			if (result == 0) {
+				/* Timeout after 20ms */
+				ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+				if (ctrl & ONENAND_CTRL_ONGO) {
+					/*
+					 * The operation seems to be still going
+					 * so give it some more time.
+					 */
+					retry_cnt += 1;
+					if (retry_cnt < 3)
+						goto retry;
+					intr = read_reg(c,
+							ONENAND_REG_INTERRUPT);
+					wait_err("timeout", state, ctrl, intr);
+					return -EIO;
+				}
+				intr = read_reg(c, ONENAND_REG_INTERRUPT);
+				if ((intr & ONENAND_INT_MASTER) == 0)
+					wait_warn("timeout", state, ctrl, intr);
+			}
+		}
+	} else {
+		/* Turn interrupts off */
+		syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
+		syscfg &= ~ONENAND_SYS_CFG1_IOBE;
+		write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
+
+		timeout = jiffies + msecs_to_jiffies(20);
+		while (time_before(jiffies, timeout)) {
+			intr = read_reg(c, ONENAND_REG_INTERRUPT);
+			if (intr & ONENAND_INT_MASTER)
+				break;
+		}
+	}
+
+	intr = read_reg(c, ONENAND_REG_INTERRUPT);
+	ctrl = read_reg(c, ONENAND_REG_CTRL_STATUS);
+
+	if (intr & ONENAND_INT_READ) {
+		int ecc = read_reg(c, ONENAND_REG_ECC_STATUS);
+
+		if (ecc) {
+			unsigned int addr1, addr8;
+
+			addr1 = read_reg(c, ONENAND_REG_START_ADDRESS1);
+			addr8 = read_reg(c, ONENAND_REG_START_ADDRESS8);
+			if (ecc & ONENAND_ECC_2BIT_ALL) {
+				printk(KERN_ERR "onenand_wait: ECC error = "
+				       "0x%04x, addr1 %#x, addr8 %#x\n",
+				       ecc, addr1, addr8);
+				mtd->ecc_stats.failed++;
+				return -EBADMSG;
+			} else if (ecc & ONENAND_ECC_1BIT_ALL) {
+				printk(KERN_NOTICE "onenand_wait: correctable "
+				       "ECC error = 0x%04x, addr1 %#x, "
+				       "addr8 %#x\n", ecc, addr1, addr8);
+				mtd->ecc_stats.corrected++;
+			}
+		}
+	} else if (state == FL_READING) {
+		wait_err("timeout", state, ctrl, intr);
+		return -EIO;
+	}
+
+	if (ctrl & ONENAND_CTRL_ERROR) {
+		wait_err("controller error", state, ctrl, intr);
+		if (ctrl & ONENAND_CTRL_LOCK)
+			printk(KERN_ERR "onenand_wait: "
+					"Device is write protected!!!\n");
+		return -EIO;
+	}
+
+	if (ctrl & 0xFE9F)
+		wait_warn("unexpected controller status", state, ctrl, intr);
+
+	return 0;
+}
+
+static inline int omap2_onenand_bufferram_offset(struct mtd_info *mtd, int area)
+{
+	struct onenand_chip *this = mtd->priv;
+
+	if (ONENAND_CURRENT_BUFFERRAM(this)) {
+		if (area == ONENAND_DATARAM)
+			return mtd->writesize;
+		if (area == ONENAND_SPARERAM)
+			return mtd->oobsize;
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_ARCH_OMAP3) || defined(MULTI_OMAP2)
+
+static int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
+					unsigned char *buffer, int offset,
+					size_t count)
+{
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+	struct onenand_chip *this = mtd->priv;
+	dma_addr_t dma_src, dma_dst;
+	int bram_offset;
+	unsigned long timeout;
+	void *buf = (void *)buffer;
+	size_t xtra;
+	volatile unsigned *done;
+
+	bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+	if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
+		goto out_copy;
+
+	if (buf >= high_memory) {
+		struct page *p1;
+
+		if (((size_t)buf & PAGE_MASK) !=
+		    ((size_t)(buf + count - 1) & PAGE_MASK))
+			goto out_copy;
+		p1 = vmalloc_to_page(buf);
+		if (!p1)
+			goto out_copy;
+		buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
+	}
+
+	xtra = count & 3;
+	if (xtra) {
+		count -= xtra;
+		memcpy(buf + count, this->base + bram_offset + count, xtra);
+	}
+
+	dma_src = c->phys_base + bram_offset;
+	dma_dst = dma_map_single(&c->pdev->dev, buf, count, DMA_FROM_DEVICE);
+	if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+		dev_err(&c->pdev->dev,
+			"Couldn't DMA map a %d byte buffer\n",
+			count);
+		goto out_copy;
+	}
+
+	omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
+				     count >> 2, 1, 0, 0, 0);
+	omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				dma_src, 0, 0);
+	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				 dma_dst, 0, 0);
+
+	INIT_COMPLETION(c->dma_done);
+	omap_start_dma(c->dma_channel);
+
+	timeout = jiffies + msecs_to_jiffies(20);
+	done = &c->dma_done.done;
+	while (time_before(jiffies, timeout))
+		if (*done)
+			break;
+
+	dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
+
+	if (!*done) {
+		dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
+		goto out_copy;
+	}
+
+	return 0;
+
+out_copy:
+	memcpy(buf, this->base + bram_offset, count);
+	return 0;
+}
+
+static int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
+					 const unsigned char *buffer,
+					 int offset, size_t count)
+{
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+	struct onenand_chip *this = mtd->priv;
+	dma_addr_t dma_src, dma_dst;
+	int bram_offset;
+	unsigned long timeout;
+	void *buf = (void *)buffer;
+	volatile unsigned *done;
+
+	bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+	if (bram_offset & 3 || (size_t)buf & 3 || count < 384)
+		goto out_copy;
+
+	/* panic_write() may be in an interrupt context */
+	if (in_interrupt())
+		goto out_copy;
+
+	if (buf >= high_memory) {
+		struct page *p1;
+
+		if (((size_t)buf & PAGE_MASK) !=
+		    ((size_t)(buf + count - 1) & PAGE_MASK))
+			goto out_copy;
+		p1 = vmalloc_to_page(buf);
+		if (!p1)
+			goto out_copy;
+		buf = page_address(p1) + ((size_t)buf & ~PAGE_MASK);
+	}
+
+	dma_src = dma_map_single(&c->pdev->dev, buf, count, DMA_TO_DEVICE);
+	dma_dst = c->phys_base + bram_offset;
+	if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+		dev_err(&c->pdev->dev,
+			"Couldn't DMA map a %d byte buffer\n",
+			count);
+		return -1;
+	}
+
+	omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
+				     count >> 2, 1, 0, 0, 0);
+	omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				dma_src, 0, 0);
+	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				 dma_dst, 0, 0);
+
+	INIT_COMPLETION(c->dma_done);
+	omap_start_dma(c->dma_channel);
+
+	timeout = jiffies + msecs_to_jiffies(20);
+	done = &c->dma_done.done;
+	while (time_before(jiffies, timeout))
+		if (*done)
+			break;
+
+	dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_TO_DEVICE);
+
+	if (!*done) {
+		dev_err(&c->pdev->dev, "timeout waiting for DMA\n");
+		goto out_copy;
+	}
+
+	return 0;
+
+out_copy:
+	memcpy(this->base + bram_offset, buf, count);
+	return 0;
+}
+
+#else
+
+int omap3_onenand_read_bufferram(struct mtd_info *mtd, int area,
+				 unsigned char *buffer, int offset,
+				 size_t count);
+
+int omap3_onenand_write_bufferram(struct mtd_info *mtd, int area,
+				  const unsigned char *buffer,
+				  int offset, size_t count);
+
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(MULTI_OMAP2)
+
+static int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
+					unsigned char *buffer, int offset,
+					size_t count)
+{
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+	struct onenand_chip *this = mtd->priv;
+	dma_addr_t dma_src, dma_dst;
+	int bram_offset;
+
+	bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+	/* DMA is not used.  Revisit PM requirements before enabling it. */
+	if (1 || (c->dma_channel < 0) ||
+	    ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
+	    (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
+		memcpy(buffer, (__force void *)(this->base + bram_offset),
+		       count);
+		return 0;
+	}
+
+	dma_src = c->phys_base + bram_offset;
+	dma_dst = dma_map_single(&c->pdev->dev, buffer, count,
+				 DMA_FROM_DEVICE);
+	if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+		dev_err(&c->pdev->dev,
+			"Couldn't DMA map a %d byte buffer\n",
+			count);
+		return -1;
+	}
+
+	omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S32,
+				     count / 4, 1, 0, 0, 0);
+	omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				dma_src, 0, 0);
+	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				 dma_dst, 0, 0);
+
+	INIT_COMPLETION(c->dma_done);
+	omap_start_dma(c->dma_channel);
+	wait_for_completion(&c->dma_done);
+
+	dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_FROM_DEVICE);
+
+	return 0;
+}
+
+static int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
+					 const unsigned char *buffer,
+					 int offset, size_t count)
+{
+	struct omap2_onenand *c = container_of(mtd, struct omap2_onenand, mtd);
+	struct onenand_chip *this = mtd->priv;
+	dma_addr_t dma_src, dma_dst;
+	int bram_offset;
+
+	bram_offset = omap2_onenand_bufferram_offset(mtd, area) + area + offset;
+	/* DMA is not used.  Revisit PM requirements before enabling it. */
+	if (1 || (c->dma_channel < 0) ||
+	    ((void *) buffer >= (void *) high_memory) || (bram_offset & 3) ||
+	    (((unsigned int) buffer) & 3) || (count < 1024) || (count & 3)) {
+		memcpy((__force void *)(this->base + bram_offset), buffer,
+		       count);
+		return 0;
+	}
+
+	dma_src = dma_map_single(&c->pdev->dev, (void *) buffer, count,
+				 DMA_TO_DEVICE);
+	dma_dst = c->phys_base + bram_offset;
+	if (dma_mapping_error(&c->pdev->dev, dma_dst)) {
+		dev_err(&c->pdev->dev,
+			"Couldn't DMA map a %d byte buffer\n",
+			count);
+		return -1;
+	}
+
+	omap_set_dma_transfer_params(c->dma_channel, OMAP_DMA_DATA_TYPE_S16,
+				     count / 2, 1, 0, 0, 0);
+	omap_set_dma_src_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				dma_src, 0, 0);
+	omap_set_dma_dest_params(c->dma_channel, 0, OMAP_DMA_AMODE_POST_INC,
+				 dma_dst, 0, 0);
+
+	INIT_COMPLETION(c->dma_done);
+	omap_start_dma(c->dma_channel);
+	wait_for_completion(&c->dma_done);
+
+	dma_unmap_single(&c->pdev->dev, dma_dst, count, DMA_TO_DEVICE);
+
+	return 0;
+}
+
+#else
+
+int omap2_onenand_read_bufferram(struct mtd_info *mtd, int area,
+				 unsigned char *buffer, int offset,
+				 size_t count);
+
+int omap2_onenand_write_bufferram(struct mtd_info *mtd, int area,
+				  const unsigned char *buffer,
+				  int offset, size_t count);
+
+#endif
+
+static struct platform_driver omap2_onenand_driver;
+
+static int __adjust_timing(struct device *dev, void *data)
+{
+	int ret = 0;
+	struct omap2_onenand *c;
+
+	c = dev_get_drvdata(dev);
+
+	BUG_ON(c->setup == NULL);
+
+	/* DMA is not in use so this is all that is needed */
+	/* Revisit for OMAP3! */
+	ret = c->setup(c->onenand.base, c->freq);
+
+	return ret;
+}
+
+int omap2_onenand_rephase(void)
+{
+	return driver_for_each_device(&omap2_onenand_driver.driver, NULL,
+				      NULL, __adjust_timing);
+}
+
+static void __devexit omap2_onenand_shutdown(struct platform_device *pdev)
+{
+	struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
+
+	/* With certain content in the buffer RAM, the OMAP boot ROM code
+	 * can recognize the flash chip incorrectly. Zero it out before
+	 * soft reset.
+	 */
+	memset((__force void *)c->onenand.base, 0, ONENAND_BUFRAM_SIZE);
+}
+
+static int __devinit omap2_onenand_probe(struct platform_device *pdev)
+{
+	struct omap_onenand_platform_data *pdata;
+	struct omap2_onenand *c;
+	int r;
+
+	pdata = pdev->dev.platform_data;
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "platform data missing\n");
+		return -ENODEV;
+	}
+
+	c = kzalloc(sizeof(struct omap2_onenand), GFP_KERNEL);
+	if (!c)
+		return -ENOMEM;
+
+	init_completion(&c->irq_done);
+	init_completion(&c->dma_done);
+	c->gpmc_cs = pdata->cs;
+	c->gpio_irq = pdata->gpio_irq;
+	c->dma_channel = pdata->dma_channel;
+	if (c->dma_channel < 0) {
+		/* if -1, don't use DMA */
+		c->gpio_irq = 0;
+	}
+
+	r = gpmc_cs_request(c->gpmc_cs, ONENAND_IO_SIZE, &c->phys_base);
+	if (r < 0) {
+		dev_err(&pdev->dev, "Cannot request GPMC CS\n");
+		goto err_kfree;
+	}
+
+	if (request_mem_region(c->phys_base, ONENAND_IO_SIZE,
+			       pdev->dev.driver->name) == NULL) {
+		dev_err(&pdev->dev, "Cannot reserve memory region at 0x%08lx, "
+			"size: 0x%x\n",	c->phys_base, ONENAND_IO_SIZE);
+		r = -EBUSY;
+		goto err_free_cs;
+	}
+	c->onenand.base = ioremap(c->phys_base, ONENAND_IO_SIZE);
+	if (c->onenand.base == NULL) {
+		r = -ENOMEM;
+		goto err_release_mem_region;
+	}
+
+	if (pdata->onenand_setup != NULL) {
+		r = pdata->onenand_setup(c->onenand.base, c->freq);
+		if (r < 0) {
+			dev_err(&pdev->dev, "Onenand platform setup failed: "
+				"%d\n", r);
+			goto err_iounmap;
+		}
+		c->setup = pdata->onenand_setup;
+	}
+
+	if (c->gpio_irq) {
+		if ((r = omap_request_gpio(c->gpio_irq)) < 0) {
+			dev_err(&pdev->dev,  "Failed to request GPIO%d for "
+				"OneNAND\n", c->gpio_irq);
+			goto err_iounmap;
+	}
+	omap_set_gpio_direction(c->gpio_irq, 1);
+
+	if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq),
+			     omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
+			     pdev->dev.driver->name, c)) < 0)
+		goto err_release_gpio;
+	}
+
+	if (c->dma_channel >= 0) {
+		r = omap_request_dma(0, pdev->dev.driver->name,
+				     omap2_onenand_dma_cb, (void *) c,
+				     &c->dma_channel);
+		if (r == 0) {
+			omap_set_dma_write_mode(c->dma_channel,
+						OMAP_DMA_WRITE_NON_POSTED);
+			omap_set_dma_src_data_pack(c->dma_channel, 1);
+			omap_set_dma_src_burst_mode(c->dma_channel,
+						    OMAP_DMA_DATA_BURST_8);
+			omap_set_dma_dest_data_pack(c->dma_channel, 1);
+			omap_set_dma_dest_burst_mode(c->dma_channel,
+						     OMAP_DMA_DATA_BURST_8);
+		} else {
+			dev_info(&pdev->dev,
+				 "failed to allocate DMA for OneNAND, "
+				 "using PIO instead\n");
+			c->dma_channel = -1;
+		}
+	}
+
+	dev_info(&pdev->dev, "initializing on CS%d, phys base 0x%08lx, virtual "
+		 "base %p\n", c->gpmc_cs, c->phys_base,
+		 c->onenand.base);
+
+	c->pdev = pdev;
+	c->mtd.name = pdev->dev.bus_id;
+	c->mtd.priv = &c->onenand;
+	c->mtd.owner = THIS_MODULE;
+
+	if (c->dma_channel >= 0) {
+		struct onenand_chip *this = &c->onenand;
+
+		this->wait = omap2_onenand_wait;
+		if (cpu_is_omap34xx()) {
+			this->read_bufferram = omap3_onenand_read_bufferram;
+			this->write_bufferram = omap3_onenand_write_bufferram;
+		} else {
+			this->read_bufferram = omap2_onenand_read_bufferram;
+			this->write_bufferram = omap2_onenand_write_bufferram;
+		}
+	}
+
+	if ((r = onenand_scan(&c->mtd, 1)) < 0)
+		goto err_release_dma;
+
+	switch ((c->onenand.version_id >> 4) & 0xf) {
+	case 0:
+		c->freq = 40;
+		break;
+	case 1:
+		c->freq = 54;
+		break;
+	case 2:
+		c->freq = 66;
+		break;
+	case 3:
+		c->freq = 83;
+		break;
+	}
+
+#ifdef CONFIG_MTD_PARTITIONS
+	if (pdata->parts != NULL)
+		r = add_mtd_partitions(&c->mtd, pdata->parts,
+				       pdata->nr_parts);
+	else
+#endif
+		r = add_mtd_device(&c->mtd);
+	if (r < 0)
+		goto err_release_onenand;
+
+	platform_set_drvdata(pdev, c);
+
+	return 0;
+
+err_release_onenand:
+	onenand_release(&c->mtd);
+err_release_dma:
+	if (c->dma_channel != -1)
+		omap_free_dma(c->dma_channel);
+	if (c->gpio_irq)
+		free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
+err_release_gpio:
+	if (c->gpio_irq)
+		omap_free_gpio(c->gpio_irq);
+err_iounmap:
+	iounmap(c->onenand.base);
+err_release_mem_region:
+	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+err_free_cs:
+	gpmc_cs_free(c->gpmc_cs);
+err_kfree:
+	kfree(c);
+
+	return r;
+}
+
+static int __devexit omap2_onenand_remove(struct platform_device *pdev)
+{
+	struct omap2_onenand *c = dev_get_drvdata(&pdev->dev);
+
+	BUG_ON(c == NULL);
+
+#ifdef CONFIG_MTD_PARTITIONS
+	if (c->parts)
+		del_mtd_partitions(&c->mtd);
+	else
+		del_mtd_device(&c->mtd);
+#else
+	del_mtd_device(&c->mtd);
+#endif
+
+	onenand_release(&c->mtd);
+	if (c->dma_channel != -1)
+		omap_free_dma(c->dma_channel);
+	omap2_onenand_shutdown(pdev);
+	platform_set_drvdata(pdev, NULL);
+	if (c->gpio_irq) {
+		free_irq(OMAP_GPIO_IRQ(c->gpio_irq), c);
+		omap_free_gpio(c->gpio_irq);
+	}
+	iounmap(c->onenand.base);
+	release_mem_region(c->phys_base, ONENAND_IO_SIZE);
+	kfree(c);
+
+	return 0;
+}
+
+static struct platform_driver omap2_onenand_driver = {
+	.probe		= omap2_onenand_probe,
+	.remove		= omap2_onenand_remove,
+	.shutdown	= omap2_onenand_shutdown,
+	.driver		= {
+		.name	= DRIVER_NAME,
+		.owner  = THIS_MODULE,
+	},
+};
+
+static int __init omap2_onenand_init(void)
+{
+	printk(KERN_INFO "OneNAND driver initializing\n");
+	return platform_driver_register(&omap2_onenand_driver);
+}
+
+static void __exit omap2_onenand_exit(void)
+{
+	platform_driver_unregister(&omap2_onenand_driver);
+}
+
+module_init(omap2_onenand_init);
+module_exit(omap2_onenand_exit);
+
+MODULE_ALIAS(DRIVER_NAME);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jarkko Lavinen <jarkko.lavinen at nokia.com>");
+MODULE_DESCRIPTION("Glue layer for OneNAND flash on OMAP2 / OMAP3");
diff --git a/include/asm-arm/arch-omap/onenand.h b/include/asm-arm/arch-omap/onenand.h
index 6c959d0..e302371 100644
--- a/include/asm-arm/arch-omap/onenand.h
+++ b/include/asm-arm/arch-omap/onenand.h
@@ -16,6 +16,11 @@ struct omap_onenand_platform_data {
 	int			gpio_irq;
 	struct mtd_partition	*parts;
 	int			nr_parts;
-	int                     (*onenand_setup)(void __iomem *);
+	int                     (*onenand_setup)(void __iomem *, int freq);
 	int			dma_channel;
 };
+
+int omap2_onenand_rephase(void);
+
+#define ONENAND_MAX_PARTITIONS 8
+
-- 
1.5.4.3



More information about the linux-mtd mailing list