[PATCH 5/5] Use mutex instead of semaphore in the MTD DataFlash driver
Matthias Kaehlcke
matthias.kaehlcke at gmail.com
Mon May 14 05:21:36 EDT 2007
The MTD DataFlash driver uses a semaphore as mutex. Use the mutex API
instead
of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke at gmail.com>
--
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index a987e91..a5ed6d2 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -14,6 +14,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/mutex.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
@@ -89,7 +90,7 @@ struct dataflash {
unsigned short page_offset; /* offset in flash address */
unsigned int page_size; /* of bytes per page */
- struct semaphore lock;
+ struct mutex lock;
struct spi_device *spi;
struct mtd_info mtd;
@@ -167,7 +168,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
x.len = 4;
spi_message_add_tail(&x, &msg);
- down(&priv->lock);
+ mutex_lock(&priv->lock);
while (instr->len > 0) {
unsigned int pageaddr;
int status;
@@ -210,7 +211,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
instr->len -= priv->page_size;
}
}
- up(&priv->lock);
+ mutex_unlock(&priv->lock);
/* Inform MTD subsystem that erase is complete */
instr->state = MTD_ERASE_DONE;
@@ -266,7 +267,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
x[1].len = len;
spi_message_add_tail(&x[1], &msg);
- down(&priv->lock);
+ mutex_lock(&priv->lock);
/* Continuous read, max clock = f(car) which may be less than
* the peak rate available. Some chips support commands with
@@ -279,7 +280,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len,
/* plus 4 "don't care" bytes */
status = spi_sync(priv->spi, &msg);
- up(&priv->lock);
+ mutex_unlock(&priv->lock);
if (status >= 0) {
*retlen = msg.actual_length - 8;
@@ -336,7 +337,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
else
writelen = len;
- down(&priv->lock);
+ mutex_lock(&priv->lock);
while (remaining > 0) {
DEBUG(MTD_DEBUG_LEVEL3, "write @ %i:%i len=%i\n",
pageaddr, offset, writelen);
@@ -441,7 +442,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len,
else
writelen = remaining;
}
- up(&priv->lock);
+ mutex_unlock(&priv->lock);
return status;
}
@@ -463,7 +464,7 @@ add_dataflash(struct spi_device *spi, char *name,
if (!priv)
return -ENOMEM;
- init_MUTEX(&priv->lock);
+ mutex_init(&priv->lock);
priv->spi = spi;
priv->page_size = pagesize;
priv->page_offset = pageoffset;
--
Matthias Kaehlcke
Linux Application Developer
Barcelona
Nothing is more despicable than respect based on fear
(Albert Camus)
.''`.
using free software / Debian GNU/Linux | http://debian.org : :' :
`. `'`
gpg --keyserver pgp.mit.edu --recv-keys 47D8E5D4 `-
More information about the linux-mtd
mailing list