RO jffs2 implementation for bootloader

Matthieu CASTET matthieu.castet at parrot.com
Fri May 4 08:06:15 EDT 2007


Hi Stefan,

Stefan Roese a écrit :
> Hi Matthieu,
> 
> On Friday 04 May 2007 11:55, Matthieu CASTET wrote:
>>> On Thu, 2007-05-03 at 08:40 +0000, Matthieu CASTET wrote:
>>>> I need to mount a jffs2 partition in a bootloader. I tried u-boot that
>>>> support jffs2, but it is very slow (2 minutes for mounting a 64MB
>>>> partition). Do you know if there are other (fast) implemenation of jffs2
>>>> suitable for a bootloader ?
>>> Not sure about any existing "fast" implementation, but mounting a JFFS2
>>> partition is about scanning whole partition. You may optimize some
>>> thing, but you have to scan anyway.
>> Well u-boot implementation is very slow. For 64MB partition : 2 minutes
>> for u-boot
> 
> This really is slow. 64MB isn't that big and shouldn't take that long to 
> mount.
> 
>> and 11 s for linux (3s with summary). 
> 
> So it can be done better.
> 
> Did you think about improving the performance in U-Boot? If so, please let's 
> move this discussion to the u-boot-users mailing list.

Somebody already try something for u-boot jffs2 [1], but is doesn't seem 
to work (don't compile).
He didn't receive any report, so u-boot jffs2 code seems unmaintained.

> 
> Thanks.
> 
> BTW: What cpu at what speed are you using?
an arm9 @240 Mhz.

Matthieu


[1] http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/25780/focus=25808




More information about the linux-mtd mailing list