NAND flash writeb fails
mitsy12 at gmail.com
Fri Aug 4 13:13:42 EDT 2006
Thank you for replying. Now I looked at for a while, I believe my
problem was that I didn't set up TLB in the bootloader correctly.
That's why the nand flash works with kernel (2.4.26) but not from my
bootloader. I just need to figure out what is wrong with my TLB setup.
On 8/3/06, Sergei Shtylyov <sshtylyov at ru.mvista.com> wrote:
> Hello, you wrote:
> > I have a AMD au1550 based board with NAND flash. When I try to write a
> > command to the flash, it just hangs on writeb(). I can't figure out
> > why it hangs there. Any suggestions?
> First off, what driver and kernel verison you're using?
> > Mitsy
> WBR, Sergei
More information about the linux-mtd