DOC2000 and Grub
Dzuy Nguyen
dzuy at infinity-studios.com
Tue Jun 11 12:27:16 EDT 2002
It's possible that the grub_firmware and the nftl are overlapping. When
run doc_loadbios,
observe the number of bytes written into DoC. It should be the size of
the grub_firmware.
I'd add a couple of blocks (erase size) to that as the offet in nftl_format.
Matt Vestal wrote:
>I 'm having the same problem as others who have posted, in getting the
>"Selected disk does not exist" error. I'm using a 96MB DOC with a
>VersaLogic VSBC-8 motherboard.
>
>-using Grub 0.92
>-patched with grub-2002-02-19-doc.patch
>-ran "aclocal && automake && autoconf" (needed automake-1.5-8)
>-./configure --enable-diskonchip-2000 --enable-ext2fs
>-../util/doc_loadbios /dev/mtd0 grub_firmware
>-./nftl_format /dev/mtd0 98304
>-fdisk /dev/nftla into multiple portions. also tried leaving it full
>-mke2fs
>-copy over necessary files (kernel and such)
>-reboot
>
>The DOC loads Grub with no problem. However, Grub has never been able to
>see the DOC filesystem(s). I've tried root (dc0), root (dc0,0), root
>(dc0,1), etc, but nothing works. I always get the "Selected disk does not
>exist, error"
>
>Any help would be greatly appreciated, as I've been pouring over this for
>days, now.
>
>Thanks,
>
>Matt
>
>
>
>______________________________________________________
>Linux MTD discussion mailing list
>http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
>
More information about the linux-mtd
mailing list