JFFS2 and the DOC 2000

[Bob Chiodini]

All,

I have a PC/104 Pentium board with a 32MB DOC2000 and 64MB of RAM. 
Currently the system is bootable and running with the 32MB DOC laid out
as follows:

0-1MB reserved for grub_firmware,
1MB-32MB formated with a single ext2 partition

How can I format the DOC with multiple jffs2 partitons.  Fdisk reports
the geometry for the DOC as:
 
Disk /dev/nftla: 1 heads, 64960 sectors, 1 cylinders
Units = cylinders of 64960 * 512 bytes

It appears that with only one cylinder there can be only one partition. 
Will altering the geometry with fdisk work?  I would like the DOC laid
out as follows:

0-2MB reserved for BIOS extension, 
2MB-6MB /dev/nftla1 (ext2 for /boot)
6MB-24MB /dev/nftla2 (jffs2 for /)
24MB-32MB /dev/nftla3 (jffs2 for /home)

Any suggestions?

-- 
Bob Chiodini
Sr. Communications Engineer
Dynacs Engineering Company, Inc.
DNX-18
Kennedy Space Center, Florida 32899
321-867-6313 (voice)
321-867-6300 (fax)

Bob...