Intel C3 chips

[Chen Yaoming]

MTD can unlock Intel C3 flash, but the code is incomplete. Please look at
drivers/mtd/chips/cfi_cmdset_0001.c

----- Original Message ----- 
From: "Jeroen Roose" <Jeroen.Roose at chess.nl>
To: <linux-mtd at lists.infradead.org>
Sent: Monday, January 21, 2002 7:37 PM
Subject: Intel C3 chips


> Hello,
> 
> We've got a board based on the CDB89712 but using C3 (TE28F320/C3BC90) in
> stead of the B3 version. The C3 chip locks all blocks on chip reset. I've
> patched the bootloader (hermit) to unlock all blocks on boot.
> I've got MTD/JFFS2 working on the board, with the bootloader patch, but I
> think MTD should unlock the blocks.
> I'm not familiar with the MTD architecture, so I don't no how/where to
> implement this, can You help me to point this out ?
> 
> Thanks,
> 
> Jeroen Roose
> 
> chess eT
> 
> http://www.chess.nl
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/