[PATCH net-next v2 00/13] net: stmmac: convert glue drivers to use stmmac_get_phy_intf_sel()

patchwork-bot+netdevbpf at kernel.org patchwork-bot+netdevbpf at kernel.org
Wed Nov 12 18:20:24 PST 2025


Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba at kernel.org>:

On Tue, 11 Nov 2025 08:11:25 +0000 you wrote:
> This series converts the remaining glue drivers that support
> multi-interface to use stmmac_get_phy_intf_sel(). The reason these
> drivers are not converted to the set_phy_intf_sel() method is
> because it is unclear whether there are ordering dependencies that
> would prevent it.
> 
> For example, reading the stm32mp2 documentation, it is required to
> set the ETH1_SEL field while the dwmac core is in reset and before
> clocks are enabled. This requirement can not be satsified at the
> moment (but could with further changes.)
> 
> [...]

Here is the summary with links:
  - [net-next,v2,01/13] net: stmmac: loongson1: use PHY_INTF_SEL_x
    https://git.kernel.org/netdev/net-next/c/5d88b24c1de8
  - [net-next,v2,02/13] net: stmmac: loongson1: use PHY_INTF_SEL_x directly
    https://git.kernel.org/netdev/net-next/c/031f7a05d4b3
  - [net-next,v2,03/13] net: stmmac: loongson1: use stmmac_get_phy_intf_sel()
    https://git.kernel.org/netdev/net-next/c/83eb6c7e1864
  - [net-next,v2,04/13] net: stmmac: mediatek: use PHY_INTF_SEL_x
    https://git.kernel.org/netdev/net-next/c/c3308d380e2c
  - [net-next,v2,05/13] net: stmmac: mediatek: use stmmac_get_phy_intf_sel()
    https://git.kernel.org/netdev/net-next/c/d9c7964fd934
  - [net-next,v2,06/13] net: stmmac: mediatek: simplify set_interface() methods
    https://git.kernel.org/netdev/net-next/c/f06620091fe7
  - [net-next,v2,07/13] net: stmmac: starfive: use PHY_INTF_SEL_x to select PHY interface
    https://git.kernel.org/netdev/net-next/c/f0917b475378
  - [net-next,v2,08/13] net: stmmac: starfive: use stmmac_get_phy_intf_sel()
    https://git.kernel.org/netdev/net-next/c/d22045997b53
  - [net-next,v2,09/13] net: stmmac: stm32: use PHY_INTF_SEL_x to select PHY interface
    https://git.kernel.org/netdev/net-next/c/73130c298fa0
  - [net-next,v2,10/13] net: stmmac: stm32: use PHY_INTF_SEL_x directly
    https://git.kernel.org/netdev/net-next/c/07669cf12ea8
  - [net-next,v2,11/13] net: stmmac: stm32: use stmmac_get_phy_intf_sel()
    https://git.kernel.org/netdev/net-next/c/45c5e24a53f1
  - [net-next,v2,12/13] net: stmmac: visconti: use PHY_INTF_SEL_x to select PHY interface
    https://git.kernel.org/netdev/net-next/c/bb68e0183e04
  - [net-next,v2,13/13] net: stmmac: visconti: use stmmac_get_phy_intf_sel()
    https://git.kernel.org/netdev/net-next/c/ccb4ff9f24e2

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html





More information about the Linux-mediatek mailing list