[PATCH net-next 2/9] dt-bindings: phy-common-props: create a reusable "protocol-names" definition

[Rob Herring]

On Thu, Dec 04, 2025 at 09:52:19AM -0600, Rob Herring wrote:
> On Sat, Nov 22, 2025 at 09:33:34PM +0200, Vladimir Oltean wrote:
> > Other properties also need to be defined per protocol than just
> > tx-p2p-microvolt-names. Create a common definition to avoid copying a 55
> > line property.
> > 
> > Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> > ---
> >  .../bindings/phy/phy-common-props.yaml        | 34 +++++++++++--------
> >  1 file changed, 19 insertions(+), 15 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/phy-common-props.yaml b/Documentation/devicetree/bindings/phy/phy-common-props.yaml
> > index 255205ac09cd..775f4dfe3cc3 100644
> > --- a/Documentation/devicetree/bindings/phy/phy-common-props.yaml
> > +++ b/Documentation/devicetree/bindings/phy/phy-common-props.yaml
> > @@ -13,22 +13,12 @@ description:
> >  maintainers:
> >    - Marek Behún <kabel at kernel.org>
> >  
> > -properties:
> > -  tx-p2p-microvolt:
> > +$defs:
> > +  protocol-names:
> >      description:
> > -      Transmit amplitude voltages in microvolts, peak-to-peak. If this property
> > -      contains multiple values for various PHY modes, the
> > -      'tx-p2p-microvolt-names' property must be provided and contain
> > -      corresponding mode names.
> > -
> > -  tx-p2p-microvolt-names:
> > -    description: |
> > -      Names of the modes corresponding to voltages in the 'tx-p2p-microvolt'
> > -      property. Required only if multiple voltages are provided.
> > -
> > -      If a value of 'default' is provided, the system should use it for any PHY
> > -      mode that is otherwise not defined here. If 'default' is not provided, the
> > -      system should use manufacturer default value.
> > +      Names of the PHY modes. If a value of 'default' is provided, the system
> > +      should use it for any PHY mode that is otherwise not defined here. If
> > +      'default' is not provided, the system should use manufacturer default value.
> >      minItems: 1
> >      maxItems: 16
> >      items:
> > @@ -89,6 +79,20 @@ properties:
> >          - mipi-dphy-univ
> >          - mipi-dphy-v2.5-univ
> >  
> > +properties:
> > +  tx-p2p-microvolt:
> > +    description:
> > +      Transmit amplitude voltages in microvolts, peak-to-peak. If this property
> > +      contains multiple values for various PHY modes, the
> > +      'tx-p2p-microvolt-names' property must be provided and contain
> > +      corresponding mode names.
> > +
> > +  tx-p2p-microvolt-names:
> > +    description:
> > +      Names of the modes corresponding to voltages in the 'tx-p2p-microvolt'
> > +      property. Required only if multiple voltages are provided.
> > +    $ref: "#/$defs/protocol-names"
> 
> The default for .*-names is the entries don't have to be unique. That's 
> for the exception, but unfortunately everyone else has to define the 
> type (type.yaml#/definitons/string).
> 
> Each user needs to define the names of the entries which will enforce 
> the length. So defining the length 1-16 here doesn't do much. So I think 
> you can drop that and then the $defs is not needed either.

I missed that all the names are defined here. Nevermind on the 2nd 
point. We probably still need either a $ref or 'uniqueItems: true'. 
Either way should work.

Rob