[PATCH net-next 2/9] dt-bindings: phy-common-props: create a reusable "protocol-names" definition

[Rob Herring]

On Sat, Nov 22, 2025 at 09:33:34PM +0200, Vladimir Oltean wrote:
> Other properties also need to be defined per protocol than just
> tx-p2p-microvolt-names. Create a common definition to avoid copying a 55
> line property.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> ---
>  .../bindings/phy/phy-common-props.yaml        | 34 +++++++++++--------
>  1 file changed, 19 insertions(+), 15 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-common-props.yaml b/Documentation/devicetree/bindings/phy/phy-common-props.yaml
> index 255205ac09cd..775f4dfe3cc3 100644
> --- a/Documentation/devicetree/bindings/phy/phy-common-props.yaml
> +++ b/Documentation/devicetree/bindings/phy/phy-common-props.yaml
> @@ -13,22 +13,12 @@ description:
>  maintainers:
>    - Marek Behún <kabel at kernel.org>
>  
> -properties:
> -  tx-p2p-microvolt:
> +$defs:
> +  protocol-names:
>      description:
> -      Transmit amplitude voltages in microvolts, peak-to-peak. If this property
> -      contains multiple values for various PHY modes, the
> -      'tx-p2p-microvolt-names' property must be provided and contain
> -      corresponding mode names.
> -
> -  tx-p2p-microvolt-names:
> -    description: |
> -      Names of the modes corresponding to voltages in the 'tx-p2p-microvolt'
> -      property. Required only if multiple voltages are provided.
> -
> -      If a value of 'default' is provided, the system should use it for any PHY
> -      mode that is otherwise not defined here. If 'default' is not provided, the
> -      system should use manufacturer default value.
> +      Names of the PHY modes. If a value of 'default' is provided, the system
> +      should use it for any PHY mode that is otherwise not defined here. If
> +      'default' is not provided, the system should use manufacturer default value.
>      minItems: 1
>      maxItems: 16
>      items:
> @@ -89,6 +79,20 @@ properties:
>          - mipi-dphy-univ
>          - mipi-dphy-v2.5-univ
>  
> +properties:
> +  tx-p2p-microvolt:
> +    description:
> +      Transmit amplitude voltages in microvolts, peak-to-peak. If this property
> +      contains multiple values for various PHY modes, the
> +      'tx-p2p-microvolt-names' property must be provided and contain
> +      corresponding mode names.
> +
> +  tx-p2p-microvolt-names:
> +    description:
> +      Names of the modes corresponding to voltages in the 'tx-p2p-microvolt'
> +      property. Required only if multiple voltages are provided.
> +    $ref: "#/$defs/protocol-names"

The default for .*-names is the entries don't have to be unique. That's 
for the exception, but unfortunately everyone else has to define the 
type (type.yaml#/definitons/string).

Each user needs to define the names of the entries which will enforce 
the length. So defining the length 1-16 here doesn't do much. So I think 
you can drop that and then the $defs is not needed either.

Rob