[PATCH v2 2/2] arm64: dts: mediatek: mt8390-genio-700-evk: add keys and USB HUB

[Macpaul Lin]

1. Add i2c, mmc to aliases.
4. Add PMIC_KEY setting.
5. Add USB HUB TUSB8020 to xhci1.
6. Re-order spi2 node.

Signed-off-by: Macpaul Lin <macpaul.lin at mediatek.com>
---
 .../dts/mediatek/mt8390-genio-700-evk.dts     | 57 +++++++++++++++----
 1 file changed, 47 insertions(+), 10 deletions(-)

Changes for v2:
 - Fix order of spi2.
 - Update pinctrl in i2c4 and rt1715.
 - Drop IT5205 and RT1715 nodes since the DTS are not completed yet.
 - Add #address-cells and #size-cells to xhci1 for supporting USB hubs.

diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
index 96b272567cb1..3e77f59f2c74 100644
--- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
@@ -23,6 +23,15 @@ / {
 		     "mediatek,mt8188";
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
 		serial0 = &uart0;
 	};
 
@@ -249,7 +258,6 @@ &i2c3 {
 &i2c4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c4_pins>;
-	pinctrl-1 = <&rt1715_int_pins>;
 	clock-frequency = <1000000>;
 	status = "okay";
 };
@@ -867,6 +875,17 @@ pins-wifi-enable {
 &pmic {
 	interrupt-parent = <&pio>;
 	interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
 };
 
 &scp {
@@ -874,6 +893,15 @@ &scp {
 	status = "okay";
 };
 
+&spi2 {
+	pinctrl-0 = <&spi2_pins>;
+	pinctrl-names = "default";
+	mediatek,pad-select = <0>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-0 = <&uart0_pins>;
 	pinctrl-names = "default";
@@ -892,15 +920,6 @@ &uart2 {
 	status = "okay";
 };
 
-&spi2 {
-	pinctrl-0 = <&spi2_pins>;
-	pinctrl-names = "default";
-	mediatek,pad-select = <0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	status = "okay";
-};
-
 &u3phy0 {
 	status = "okay";
 };
@@ -921,6 +940,24 @@ &xhci0 {
 &xhci1 {
 	status = "okay";
 	vusb33-supply = <&mt6359_vusb_ldo_reg>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub at 1 {
+		compatible = "usb451,8025";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&usb_hub_fixed_3v3>;
+	};
+
+	hub_3_0: hub at 2 {
+		compatible = "usb451,8027";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+		vdd-supply = <&usb_hub_fixed_3v3>;
+	};
 };
 
 &xhci2 {
-- 
2.45.2