[PATCH v2 1/2] arm64: dts: mediatek: mt8390-genio-700-evk: update regulator names
Macpaul Lin
macpaul.lin at mediatek.com
Mon Oct 7 02:02:43 PDT 2024
Update regulator names to match schematics, replacing generic terms.
1. Add system wide 'reg_vsys' node for 4.2V power rail.
2. Add 'reg_vsys' node as 'vin-supply' for the following nodes
- common_fixed_5v, edp_panel_fixed_3v3, gpio_fixed_3v3, sdio_fixed_3v3,
touch0_fixed_3v3, usb_hub_fixed_3v3, usb_p0_vbus, and usb_p1_vbus.
3. Update regulator names according to the stable output name on
schematics.
- vdd_5v, vedp_3v3, ext_3v3, vio18_conn, wifi_3v3, vio33_tp1, vhub_3v3,
vbus_p0, vbus_p1.
- vcn18_pmu, vcn33_2_pmu, dvdd_proc_l, dvdd_core, vpa_pmu, dvdd_adsp,
va12_abb2_pmu, vsim1_pmu, vufs18_pmu.
4. Remove usb_hub_reset_1v8. Use 'hub' node to probe USB HUB
in subsequent patches.
Suggested-by: Chen-Yu Tsai <wenst at chromium.org>
Signed-off-by: Macpaul Lin <macpaul.lin at mediatek.com>
---
.../dts/mediatek/mt8390-genio-700-evk.dts | 65 ++++++++++++-------
1 file changed, 42 insertions(+), 23 deletions(-)
Changes for v2:
- Add Suggested-by: tag.
- Rebase on mediatek/dts64 branch (v6.12-rc1)
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
index 0a6c9871b41e..96b272567cb1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
@@ -87,103 +87,113 @@ vpu_mem: memory at 57000000 {
common_fixed_5v: regulator-0 {
compatible = "regulator-fixed";
- regulator-name = "5v_en";
+ regulator-name = "vdd_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&pio 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
+ vin-supply = <®_vsys>;
};
edp_panel_fixed_3v3: regulator-1 {
compatible = "regulator-fixed";
- regulator-name = "edp_panel_3v3";
+ regulator-name = "vedp_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpio = <&pio 15 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&edp_panel_3v3_en_pins>;
+ vin-supply = <®_vsys>;
};
gpio_fixed_3v3: regulator-2 {
compatible = "regulator-fixed";
- regulator-name = "gpio_3v3_en";
+ regulator-name = "ext_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pio 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
+ vin-supply = <®_vsys>;
};
+ /* system wide 4.2V power rail from charger */
+ reg_vsys: regulator-vsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* used by mmc2 */
sdio_fixed_1v8: regulator-3 {
compatible = "regulator-fixed";
- regulator-name = "sdio_io";
+ regulator-name = "vio18_conn";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
regulator-always-on;
};
+ /* used by mmc2 */
sdio_fixed_3v3: regulator-4 {
compatible = "regulator-fixed";
- regulator-name = "sdio_card";
+ regulator-name = "wifi_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pio 74 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
+ vin-supply = <®_vsys>;
};
touch0_fixed_3v3: regulator-5 {
compatible = "regulator-fixed";
- regulator-name = "touch_3v3";
+ regulator-name = "vio33_tp1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pio 119 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ vin-supply = <®_vsys>;
};
usb_hub_fixed_3v3: regulator-6 {
compatible = "regulator-fixed";
- regulator-name = "usb_hub_3v3";
+ regulator-name = "vhub_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pio 112 GPIO_ACTIVE_HIGH>; /* HUB_3V3_EN */
startup-delay-us = <10000>;
enable-active-high;
+ vin-supply = <®_vsys>;
};
- usb_hub_reset_1v8: regulator-7 {
- compatible = "regulator-fixed";
- regulator-name = "usb_hub_reset";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- gpio = <&pio 7 GPIO_ACTIVE_HIGH>; /* HUB_RESET */
- vin-supply = <&usb_hub_fixed_3v3>;
- };
-
- usb_p0_vbus: regulator-8 {
+ usb_p0_vbus: regulator-7 {
compatible = "regulator-fixed";
- regulator-name = "usb_p0_vbus";
+ regulator-name = "vbus_p0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&pio 84 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ vin-supply = <®_vsys>;
};
- usb_p1_vbus: regulator-9 {
+ usb_p1_vbus: regulator-8 {
compatible = "regulator-fixed";
- regulator-name = "usb_p1_vbus";
+ regulator-name = "vbus_p1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&pio 87 GPIO_ACTIVE_HIGH>;
enable-active-high;
+ vin-supply = <®_vsys>;
};
- usb_p2_vbus: regulator-10 {
+ /* used by ssusb2 */
+ usb_p2_vbus: regulator-9 {
compatible = "regulator-fixed";
- regulator-name = "usb_p2_vbus";
+ regulator-name = "wifi_3v3";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
@@ -308,22 +318,27 @@ &mt6359_vbbck_ldo_reg {
};
&mt6359_vcn18_ldo_reg {
+ regulator-name = "vcn18_pmu";
regulator-always-on;
};
&mt6359_vcn33_2_bt_ldo_reg {
+ regulator-name = "vcn33_2_pmu";
regulator-always-on;
};
&mt6359_vcore_buck_reg {
+ regulator-name = "dvdd_proc_l";
regulator-always-on;
};
&mt6359_vgpu11_buck_reg {
+ regulator-name = "dvdd_core";
regulator-always-on;
};
&mt6359_vpa_buck_reg {
+ regulator-name = "vpa_pmu";
regulator-max-microvolt = <3100000>;
};
@@ -337,14 +352,17 @@ &mt6359_vproc2_buck_reg {
};
&mt6359_vpu_buck_reg {
+ regulator-name = "dvdd_adsp";
regulator-always-on;
};
&mt6359_vrf12_ldo_reg {
+ regulator-name = "va12_abb2_pmu";
regulator-always-on;
};
&mt6359_vsim1_ldo_reg {
+ regulator-name = "vsim1_pmu";
regulator-enable-ramp-delay = <480>;
};
@@ -358,6 +376,7 @@ &mt6359_vsram_others_ldo_reg {
};
&mt6359_vufs_ldo_reg {
+ regulator-name = "vufs18_pmu";
regulator-always-on;
};
@@ -902,10 +921,10 @@ &xhci0 {
&xhci1 {
status = "okay";
vusb33-supply = <&mt6359_vusb_ldo_reg>;
- vbus-supply = <&usb_hub_reset_1v8>;
};
&xhci2 {
status = "okay";
vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ vbus-supply = <&sdio_fixed_3v3>; /* wifi_3v3 */
};
--
2.45.2
More information about the Linux-mediatek
mailing list