[RFC v1 10/14] arm64: dts: mediatek: mt7988: add lvts node
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Wed Nov 27 05:34:49 PST 2024
Il 29/10/24 11:39, Frank Wunderlich ha scritto:
> From: Frank Wunderlich <frank-w at public-files.de>
>
> Add Low Voltage Thermal Sensor (LVTS) node for mt7988 SoC.
>
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
Please add the lvts_calibration nvmem entry in this commit instead.
Cheers,
Angelo
> ---
> arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> index ed8ce1e6f68b..de9a9ff2edd8 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
> @@ -4,6 +4,7 @@
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/phy/phy.h>
> #include <dt-bindings/pinctrl/mt65xx.h>
> +#include <dt-bindings/reset/mediatek,mt7988-resets.h>
>
> / {
> compatible = "mediatek,mt7988a";
> @@ -103,6 +104,7 @@ infracfg: clock-controller at 10001000 {
> compatible = "mediatek,mt7988-infracfg", "syscon";
> reg = <0 0x10001000 0 0x1000>;
> #clock-cells = <1>;
> + #reset-cells = <1>;
> };
>
> topckgen: clock-controller at 1001b000 {
> @@ -268,6 +270,17 @@ i2c2: i2c at 11005000 {
> status = "disabled";
> };
>
> + lvts: lvts at 1100a000 {
> + compatible = "mediatek,mt7988-lvts-ap";
> + #thermal-sensor-cells = <1>;
> + reg = <0 0x1100a000 0 0x1000>;
> + clocks = <&infracfg CLK_INFRA_26M_THERM_SYSTEM>;
> + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> + resets = <&infracfg MT7988_INFRA_RST1_THERM_CTRL_SWRST>;
> + nvmem-cells = <&lvts_calibration>;
> + nvmem-cell-names = "lvts-calib-data-1";
> + };
> +
> ssusb0: usb at 11190000 {
> compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci";
> reg = <0 0x11190000 0 0x2e00>,
More information about the Linux-mediatek
mailing list