[PATCH v2 3/4] PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()

Lorenzo Bianconi lorenzo at kernel.org
Fri Nov 15 01:15:07 PST 2024


> On Sat, Nov 09, 2024 at 10:28:39AM +0100, Lorenzo Bianconi wrote:
> > In order to make the code more readable, move phy and mac reset lines
> > assert/de-assert configuration in .power_up() callback
> > (mtk_pcie_en7581_power_up()/mtk_pcie_power_up()).
> > 
> 
> I don't understand how moving the code (duplicting it also) makes the code more
> readable. Could you please explain?

Hi Manivannan,

this has been requested by Bjorn in
https://patchwork.kernel.org/project/linux-pci/patch/aca00bd672ee576ad96d279414fc0835ff31f637.1720022580.git.lorenzo@kernel.org/#26110282

> 
> > Introduce PCIE_MTK_RESET_TIME_US macro for the time needed to
> > complete PCIe reset on MediaTek controller.
> > 
> > Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
> > ---
> >  drivers/pci/controller/pcie-mediatek-gen3.c | 28 ++++++++++++++++++++--------
> >  1 file changed, 20 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
> > index 8c8c733a145634cdbfefd339f4a692f25a6e24de..1ad93d2407810ba873d9a16da96208b3cc0c3011 100644
> > --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> > @@ -120,6 +120,9 @@
> >  
> >  #define MAX_NUM_PHY_RESETS		3
> >  
> > +/* Time in us needed to complete PCIe reset on MediaTek controller */
> 
> No need of this comment. Macro name itself is explanatory.

ack, I will fix it.

Regards,
Lorenzo

> 
> - Mani
> 
> > +#define PCIE_MTK_RESET_TIME_US		10
> > +
> >  /* Time in ms needed to complete PCIe reset on EN7581 SoC */
> >  #define PCIE_EN7581_RESET_TIME_MS	100
> >  
> > @@ -867,6 +870,14 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
> >  	int err;
> >  	u32 val;
> >  
> > +	/*
> > +	 * The controller may have been left out of reset by the bootloader
> > +	 * so make sure that we get a clean start by asserting resets here.
> > +	 */
> > +	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
> > +				  pcie->phy_resets);
> > +	reset_control_assert(pcie->mac_reset);
> > +
> >  	/*
> >  	 * Wait for the time needed to complete the bulk assert in
> >  	 * mtk_pcie_setup for EN7581 SoC.
> > @@ -941,6 +952,15 @@ static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
> >  	struct device *dev = pcie->dev;
> >  	int err;
> >  
> > +	/*
> > +	 * The controller may have been left out of reset by the bootloader
> > +	 * so make sure that we get a clean start by asserting resets here.
> > +	 */
> > +	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
> > +				  pcie->phy_resets);
> > +	reset_control_assert(pcie->mac_reset);
> > +	usleep_range(PCIE_MTK_RESET_TIME_US, 2 * PCIE_MTK_RESET_TIME_US);
> > +
> >  	/* PHY power on and enable pipe clock */
> >  	err = reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
> >  	if (err) {
> > @@ -1013,14 +1033,6 @@ static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie)
> >  	 * counter since the bulk is shared.
> >  	 */
> >  	reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
> > -	/*
> > -	 * The controller may have been left out of reset by the bootloader
> > -	 * so make sure that we get a clean start by asserting resets here.
> > -	 */
> > -	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
> > -
> > -	reset_control_assert(pcie->mac_reset);
> > -	usleep_range(10, 20);
> >  
> >  	/* Don't touch the hardware registers before power up */
> >  	err = pcie->soc->power_up(pcie);
> > 
> > -- 
> > 2.47.0
> > 
> 
> -- 
> மணிவண்ணன் சதாசிவம்
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20241115/b10d8657/attachment.sig>


More information about the Linux-mediatek mailing list