[PATCH v2 3/4] PCI: mediatek-gen3: Move reset/assert callbacks in .power_up()

[Manivannan Sadhasivam]

On Sat, Nov 09, 2024 at 10:28:39AM +0100, Lorenzo Bianconi wrote:
> In order to make the code more readable, move phy and mac reset lines
> assert/de-assert configuration in .power_up() callback
> (mtk_pcie_en7581_power_up()/mtk_pcie_power_up()).
> 

I don't understand how moving the code (duplicting it also) makes the code more
readable. Could you please explain?

> Introduce PCIE_MTK_RESET_TIME_US macro for the time needed to
> complete PCIe reset on MediaTek controller.
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
> ---
>  drivers/pci/controller/pcie-mediatek-gen3.c | 28 ++++++++++++++++++++--------
>  1 file changed, 20 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
> index 8c8c733a145634cdbfefd339f4a692f25a6e24de..1ad93d2407810ba873d9a16da96208b3cc0c3011 100644
> --- a/drivers/pci/controller/pcie-mediatek-gen3.c
> +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> @@ -120,6 +120,9 @@
>  
>  #define MAX_NUM_PHY_RESETS		3
>  
> +/* Time in us needed to complete PCIe reset on MediaTek controller */

No need of this comment. Macro name itself is explanatory.

- Mani

> +#define PCIE_MTK_RESET_TIME_US		10
> +
>  /* Time in ms needed to complete PCIe reset on EN7581 SoC */
>  #define PCIE_EN7581_RESET_TIME_MS	100
>  
> @@ -867,6 +870,14 @@ static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
>  	int err;
>  	u32 val;
>  
> +	/*
> +	 * The controller may have been left out of reset by the bootloader
> +	 * so make sure that we get a clean start by asserting resets here.
> +	 */
> +	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
> +				  pcie->phy_resets);
> +	reset_control_assert(pcie->mac_reset);
> +
>  	/*
>  	 * Wait for the time needed to complete the bulk assert in
>  	 * mtk_pcie_setup for EN7581 SoC.
> @@ -941,6 +952,15 @@ static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)
>  	struct device *dev = pcie->dev;
>  	int err;
>  
> +	/*
> +	 * The controller may have been left out of reset by the bootloader
> +	 * so make sure that we get a clean start by asserting resets here.
> +	 */
> +	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
> +				  pcie->phy_resets);
> +	reset_control_assert(pcie->mac_reset);
> +	usleep_range(PCIE_MTK_RESET_TIME_US, 2 * PCIE_MTK_RESET_TIME_US);
> +
>  	/* PHY power on and enable pipe clock */
>  	err = reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
>  	if (err) {
> @@ -1013,14 +1033,6 @@ static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie)
>  	 * counter since the bulk is shared.
>  	 */
>  	reset_control_bulk_deassert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
> -	/*
> -	 * The controller may have been left out of reset by the bootloader
> -	 * so make sure that we get a clean start by asserting resets here.
> -	 */
> -	reset_control_bulk_assert(pcie->soc->phy_resets.num_resets, pcie->phy_resets);
> -
> -	reset_control_assert(pcie->mac_reset);
> -	usleep_range(10, 20);
>  
>  	/* Don't touch the hardware registers before power up */
>  	err = pcie->soc->power_up(pcie);
> 
> -- 
> 2.47.0
> 

-- 
மணிவண்ணன் சதாசிவம்