[PATCH v2] mips: dts: ralink: mt7621: add cell count properties to usb

[Arınç ÜNAL]

On 8.03.2024 01:37, Justin Swartz wrote:
> Add default #address-cells and #size-cells properties to the
> usb node, which should be suitable for hubs and devices without
> explicitly declared interface nodes, as:
> 
>    "#address-cells":
>      description: should be 1 for hub nodes with device nodes,
>        should be 2 for device nodes with interface nodes.
>      enum: [1, 2]
> 
>    "#size-cells":
>      const: 0
> 
> -- Documentation/devicetree/bindings/usb/usb-device.yaml
> 
> This version of the patch places the properties according to
> the order recommended by:
> 
>     Documentation/devicetree/bindings/dts-coding-style.rst
> 
> Signed-off-by: Justin Swartz <justin.swartz at risingedge.co.za>
> ---
>   arch/mips/boot/dts/ralink/mt7621.dtsi | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/mips/boot/dts/ralink/mt7621.dtsi b/arch/mips/boot/dts/ralink/mt7621.dtsi
> index 5a89f0b8c..7532e17dd 100644
> --- a/arch/mips/boot/dts/ralink/mt7621.dtsi
> +++ b/arch/mips/boot/dts/ralink/mt7621.dtsi
> @@ -289,10 +289,10 @@ usb: usb at 1e1c0000 {
>   		reg = <0x1e1c0000 0x1000
>   		       0x1e1d0700 0x0100>;
>   		reg-names = "mac", "ippc";
> -
> +		#address-cells = <1>;
> +		#size-cells = <0>;
>   		clocks = <&sysc MT7621_CLK_XTAL>;
>   		clock-names = "sys_ck";
> -

Please keep the empty lines. It's easier to read. I don't see anything on
the Devicetree Sources (DTS) Coding Style that would restrict this.

Arınç