[PATCH net v3] net: dsa: mt7530: fix impossible MDIO address and issue warning

[Arınç ÜNAL]

On 04/07/2024 21:19, Arınç ÜNAL wrote:
> On 04/07/2024 20:21, Vladimir Oltean wrote:
>> On Wed, Jul 03, 2024 at 10:03:09AM +0300, Arınç ÜNAL wrote:
>>> Works on standalone MT7530, MT7621's MCM MT7530, and MT7531. From MT7621's
>>> MCM MT7530:
>>>
>>> [    1.357287] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
>>
>> Why is the device corresponding to the first print located at address 1f,
>> then 0?
> 
> Because mdio_device_register() in mt7530_reregister() runs with new_mdiodev
> after dev_warn() runs with mdiodev.

I meant before. mdio_device_register() with the new_mdiodev argument is
called before dev_warn() is called with the mdiodev argument.

> 
>>
>>> [    1.364065] mt7530-mdio mdio-bus:00: [Firmware Warn]: impossible switch MDIO address in device tree, assuming 31
>>> [    1.374303] mt7530-mdio mdio-bus:00: probe with driver mt7530-mdio failed with error -14
>>> [...]
>>> [    1.448370] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
>>> [    1.477676] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode
>>> [    1.485687] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
>>> [    1.493480] mt7530-mdio mdio-bus:1f: configuring for fixed/trgmii link mode
>>> [    1.502680] mt7530-mdio mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=17)
>>> [    1.513620] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
>>> [    1.519671] mt7530-mdio mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=18)
>>> [    1.533072] mt7530-mdio mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=19)
>>> [    1.545042] mt7530-mdio mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=20)
>>> [    1.557031] mt7530-mdio mdio-bus:1f wan (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7530 PHY] (irq=21)
> 
> Arınç

Arınç