Re: [PATCH v2 2/2] clk: mediatek: add infracfg reset controller for mt7988

[Frank Wunderlich]

Am 8. Januar 2024 11:12:26 MEZ schrieb AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>:
>Il 05/01/24 17:20, Frank Wunderlich ha scritto:
>> From: Frank Wunderlich <frank-w at public-files.de>
>> 
>> Infracfg can also operate as reset controller, add support for it.
>> 
>> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
>> ---
>>   drivers/clk/mediatek/clk-mt7988-infracfg.c | 20 ++++++++++++++++++++
>>   1 file changed, 20 insertions(+)
>> 
>> diff --git a/drivers/clk/mediatek/clk-mt7988-infracfg.c b/drivers/clk/mediatek/clk-mt7988-infracfg.c
>> index 8011ef278bea..1660a45349ff 100644
>> --- a/drivers/clk/mediatek/clk-mt7988-infracfg.c
>> +++ b/drivers/clk/mediatek/clk-mt7988-infracfg.c
>> @@ -14,6 +14,9 @@
>>   #include "clk-gate.h"
>>   #include "clk-mux.h"
>>   #include <dt-bindings/clock/mediatek,mt7988-clk.h>
>> +#include <dt-bindings/reset/mediatek,mt7988-resets.h>
>> +
>> +#define	INFRA_RST_SET_OFFSET	0x80
>>     static DEFINE_SPINLOCK(mt7988_clk_lock);
>>   @@ -249,12 +252,29 @@ static const struct mtk_gate infra_clks[] = {
>>   	GATE_INFRA3(CLK_INFRA_133M_PCIE_CK_P3, "infra_133m_pcie_ck_p3", "sysaxi_sel", 31),
>>   };
>>   +static u16 infra_rst_ofs[] = {
>> +	INFRA_RST_SET_OFFSET,
>> +};
>> +
>> +static u16 infra_idx_map[] = {
>> +	[MT7988_INFRA_RST0_THERM_CTRL_SWRST] = 0 * RST_NR_PER_BANK + 9,
>
>The MT7988A datasheet says that INFRA_RST0 bit 9 is CONN2EMI_M0_GALS_SLV_SWRST, so
>this is wrong: THERM_CTRL_SWRST is in the RST1 register, bit 9.
>
>Also, I'm sure that you really want to add the PCIe MAC reset bit as well, to be
>used with the PCIe driver...
>
>[MT7988_INFRA_RST0_PEXTP_MAC_SWRST] = 0 * RST_NR_PER_BANK + 6,
>[MT7988_INFRA_RST1_THERM_CTRL_SWRST] = 1 * RST_NR_PER_BANK + 9,

Yes you are right...i have only rst1 as screenshot,need to get the full datasheet or can you tell me base address for rst0? Need to change value of INFRA_RST_SET_OFFSET then to rst0 and check RST_NR_PER_BANK to be correct.

>Enjoy... :-)
>
>Cheers,
>Angelo
>


regards Frank