[net-next RFC PATCH 3/3] net: phy: bcm7xxx: use common OPs for PHYs where possible

Christian Marangi ansuelsmth at gmail.com
Sat Feb 17 11:41:14 PST 2024


Group common OPs for PHY, make them static and reference these
statically link OPs table instead of duplicating them for each PHY.

Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
 drivers/net/phy/bcm7xxx.c | 80 +++++++++++++++++++++------------------
 1 file changed, 44 insertions(+), 36 deletions(-)

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index c820a94b30a4..adfe364846dd 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -840,6 +840,17 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	return ret;
 }
 
+static const struct phy_driver_ops bcm7xxx_28nm_gpy_ops = {
+	.config_init	= bcm7xxx_28nm_config_init,
+	.resume		= bcm7xxx_28nm_resume,
+	.get_tunable	= bcm7xxx_28nm_get_tunable,
+	.set_tunable	= bcm7xxx_28nm_set_tunable,
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm7xxx_28nm_get_phy_stats,
+	.probe		= bcm7xxx_28nm_probe,
+};
+
 #define BCM7XXX_28NM_GPHY(_oui, _name)					\
 {									\
 	.phy_id		= (_oui),					\
@@ -847,18 +858,20 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.name		= _name,					\
 	/* PHY_GBIT_FEATURES */						\
 	.flags		= PHY_IS_INTERNAL,				\
-	.ops		= &(const struct phy_driver_ops){		\
-	.config_init	= bcm7xxx_28nm_config_init,			\
-	.resume		= bcm7xxx_28nm_resume,				\
-	.get_tunable	= bcm7xxx_28nm_get_tunable,			\
-	.set_tunable	= bcm7xxx_28nm_set_tunable,			\
-	.get_sset_count	= bcm_phy_get_sset_count,			\
-	.get_strings	= bcm_phy_get_strings,				\
-	.get_stats	= bcm7xxx_28nm_get_phy_stats,			\
-	.probe		= bcm7xxx_28nm_probe,				\
-	},								\
+	.ops		= &bcm7xxx_28nm_gpy_ops,			\
 }
 
+static const struct phy_driver_ops bcm7xxx_28nm_ephy_ops = {
+	.config_init	= bcm7xxx_28nm_ephy_config_init,
+	.resume		= bcm7xxx_28nm_ephy_resume,
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm7xxx_28nm_get_phy_stats,
+	.probe		= bcm7xxx_28nm_probe,
+	.read_mmd	= bcm7xxx_28nm_ephy_read_mmd,
+	.write_mmd	= bcm7xxx_28nm_ephy_write_mmd,
+};
+
 #define BCM7XXX_28NM_EPHY(_oui, _name)					\
 {									\
 	.phy_id		= (_oui),					\
@@ -866,18 +879,16 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.name		= _name,					\
 	/* PHY_BASIC_FEATURES */					\
 	.flags		= PHY_IS_INTERNAL,				\
-	.ops		= &(const struct phy_driver_ops){		\
-	.config_init	= bcm7xxx_28nm_ephy_config_init,		\
-	.resume		= bcm7xxx_28nm_ephy_resume,			\
-	.get_sset_count	= bcm_phy_get_sset_count,			\
-	.get_strings	= bcm_phy_get_strings,				\
-	.get_stats	= bcm7xxx_28nm_get_phy_stats,			\
-	.probe		= bcm7xxx_28nm_probe,				\
-	.read_mmd	= bcm7xxx_28nm_ephy_read_mmd,			\
-	.write_mmd	= bcm7xxx_28nm_ephy_write_mmd,			\
-	},								\
+	.ops		= &bcm7xxx_28nm_ephy_ops,			\
 }
 
+static const struct phy_driver_ops bcm7xxx_40nm_ephy_ops = {
+	.soft_reset	= genphy_soft_reset,
+	.config_init    = bcm7xxx_config_init,
+	.suspend        = bcm7xxx_suspend,
+	.resume         = bcm7xxx_config_init,
+};
+
 #define BCM7XXX_40NM_EPHY(_oui, _name)					\
 {									\
 	.phy_id         = (_oui),					\
@@ -885,14 +896,20 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.name           = _name,					\
 	/* PHY_BASIC_FEATURES */					\
 	.flags          = PHY_IS_INTERNAL,				\
-	.ops		= &(const struct phy_driver_ops){		\
-	.soft_reset	= genphy_soft_reset,				\
-	.config_init    = bcm7xxx_config_init,				\
-	.suspend        = bcm7xxx_suspend,				\
-	.resume         = bcm7xxx_config_init,				\
-	},								\
+	.ops		= &bcm7xxx_40nm_ephy_ops,			\
 }
 
+static const struct phy_driver_ops bcm7xxx_16nm_ephy_ops = {
+	.get_sset_count	= bcm_phy_get_sset_count,
+	.get_strings	= bcm_phy_get_strings,
+	.get_stats	= bcm7xxx_28nm_get_phy_stats,
+	.probe		= bcm7xxx_28nm_probe,
+	.config_init	= bcm7xxx_16nm_ephy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.resume		= bcm7xxx_16nm_ephy_resume,
+};
+
 #define BCM7XXX_16NM_EPHY(_oui, _name)					\
 {									\
 	.phy_id		= (_oui),					\
@@ -900,16 +917,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
 	.name		= _name,					\
 	/* PHY_BASIC_FEATURES */					\
 	.flags		= PHY_IS_INTERNAL,				\
-	.ops		= &(const struct phy_driver_ops){		\
-	.get_sset_count	= bcm_phy_get_sset_count,			\
-	.get_strings	= bcm_phy_get_strings,				\
-	.get_stats	= bcm7xxx_28nm_get_phy_stats,			\
-	.probe		= bcm7xxx_28nm_probe,				\
-	.config_init	= bcm7xxx_16nm_ephy_config_init,		\
-	.config_aneg	= genphy_config_aneg,				\
-	.read_status	= genphy_read_status,				\
-	.resume		= bcm7xxx_16nm_ephy_resume,			\
-	},								\
+	.ops		= &bcm7xxx_16nm_ephy_ops,			\
 }
 
 static struct phy_driver bcm7xxx_driver[] = {
-- 
2.43.0




More information about the Linux-mediatek mailing list