[net-next RFC PATCH 2/3] net: phy: aquantia: use common OPs for PHYs where possible

Christian Marangi ansuelsmth at gmail.com
Sat Feb 17 11:41:13 PST 2024


Group common OPs for PHY, make them static and reference these
statically link OPs table instead of duplicating them for each PHY.

Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
 drivers/net/phy/aquantia/aquantia_main.c | 207 ++++++++---------------
 1 file changed, 69 insertions(+), 138 deletions(-)

diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c
index 2166370ccc82..5720ceda303f 100644
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -768,53 +768,14 @@ static int aqr111_config_init(struct phy_device *phydev)
 	return aqr107_config_init(phydev);
 }
 
-static struct phy_driver aqr_driver[] = {
-{
-	PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
-	.name		= "Aquantia AQ1202",
-	.ops		= &(const struct phy_driver_ops){
-	.config_aneg    = aqr_config_aneg,
-	.config_intr	= aqr_config_intr,
-	.handle_interrupt = aqr_handle_interrupt,
-	.read_status	= aqr_read_status,
-	},
-},
-{
-	PHY_ID_MATCH_MODEL(PHY_ID_AQ2104),
-	.name		= "Aquantia AQ2104",
-	.ops		= &(const struct phy_driver_ops){
-	.config_aneg    = aqr_config_aneg,
-	.config_intr	= aqr_config_intr,
-	.handle_interrupt = aqr_handle_interrupt,
-	.read_status	= aqr_read_status,
-	},
-},
-{
-	PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
-	.name		= "Aquantia AQR105",
-	.ops		= &(const struct phy_driver_ops){
-	.config_aneg    = aqr_config_aneg,
-	.config_intr	= aqr_config_intr,
-	.handle_interrupt = aqr_handle_interrupt,
-	.read_status	= aqr_read_status,
-	.suspend	= aqr107_suspend,
-	.resume		= aqr107_resume,
-	},
-},
-{
-	PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
-	.name		= "Aquantia AQR106",
-	.ops		= &(const struct phy_driver_ops){
+static const struct phy_driver_ops aqr106_ops = {
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
 	.handle_interrupt = aqr_handle_interrupt,
 	.read_status	= aqr_read_status,
-	},
-},
-{
-	PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
-	.name		= "Aquantia AQR107",
-	.ops		= &(const struct phy_driver_ops){
+};
+
+static const struct phy_driver_ops aqr107_ops = {
 	.probe		= aqr107_probe,
 	.get_rate_matching = aqr107_get_rate_matching,
 	.config_init	= aqr107_config_init,
@@ -830,15 +791,12 @@ static struct phy_driver aqr_driver[] = {
 	.get_strings	= aqr107_get_strings,
 	.get_stats	= aqr107_get_stats,
 	.link_change_notify = aqr107_link_change_notify,
-	},
-},
-{
-	PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
-	.name		= "Aquantia AQCS109",
-	.ops		= &(const struct phy_driver_ops){
+};
+
+static const struct phy_driver_ops aqr111_ops = {
 	.probe		= aqr107_probe,
 	.get_rate_matching = aqr107_get_rate_matching,
-	.config_init	= aqcs109_config_init,
+	.config_init	= aqr111_config_init,
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
 	.handle_interrupt = aqr_handle_interrupt,
@@ -851,36 +809,66 @@ static struct phy_driver aqr_driver[] = {
 	.get_strings	= aqr107_get_strings,
 	.get_stats	= aqr107_get_stats,
 	.link_change_notify = aqr107_link_change_notify,
-	},
+};
+
+static const struct phy_driver_ops aqr113_ops = {
+	.probe          = aqr107_probe,
+	.get_rate_matching = aqr107_get_rate_matching,
+	.config_init    = aqr113c_config_init,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr    = aqr_config_intr,
+	.handle_interrupt       = aqr_handle_interrupt,
+	.read_status    = aqr107_read_status,
+	.get_tunable    = aqr107_get_tunable,
+	.set_tunable    = aqr107_set_tunable,
+	.suspend        = aqr107_suspend,
+	.resume         = aqr107_resume,
+	.get_sset_count = aqr107_get_sset_count,
+	.get_strings    = aqr107_get_strings,
+	.get_stats      = aqr107_get_stats,
+	.link_change_notify = aqr107_link_change_notify,
+};
+
+static struct phy_driver aqr_driver[] = {
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQ1202),
+	.name		= "Aquantia AQ1202",
+	.ops		= &aqr106_ops,
 },
 {
-	PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
-	.name		= "Aquantia AQR111",
+	PHY_ID_MATCH_MODEL(PHY_ID_AQ2104),
+	.name		= "Aquantia AQ2104",
+	.ops		= &aqr106_ops,
+},
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR105),
+	.name		= "Aquantia AQR105",
 	.ops		= &(const struct phy_driver_ops){
-	.probe		= aqr107_probe,
-	.get_rate_matching = aqr107_get_rate_matching,
-	.config_init	= aqr111_config_init,
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
 	.handle_interrupt = aqr_handle_interrupt,
-	.read_status	= aqr107_read_status,
-	.get_tunable    = aqr107_get_tunable,
-	.set_tunable    = aqr107_set_tunable,
+	.read_status	= aqr_read_status,
 	.suspend	= aqr107_suspend,
 	.resume		= aqr107_resume,
-	.get_sset_count	= aqr107_get_sset_count,
-	.get_strings	= aqr107_get_strings,
-	.get_stats	= aqr107_get_stats,
-	.link_change_notify = aqr107_link_change_notify,
 	},
 },
 {
-	PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
-	.name		= "Aquantia AQR111B0",
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR106),
+	.name		= "Aquantia AQR106",
+	.ops		= &aqr106_ops,
+},
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR107),
+	.name		= "Aquantia AQR107",
+	.ops		= &aqr107_ops,
+},
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
+	.name		= "Aquantia AQCS109",
 	.ops		= &(const struct phy_driver_ops){
 	.probe		= aqr107_probe,
 	.get_rate_matching = aqr107_get_rate_matching,
-	.config_init	= aqr111_config_init,
+	.config_init	= aqcs109_config_init,
 	.config_aneg    = aqr_config_aneg,
 	.config_intr	= aqr_config_intr,
 	.handle_interrupt = aqr_handle_interrupt,
@@ -895,97 +883,40 @@ static struct phy_driver aqr_driver[] = {
 	.link_change_notify = aqr107_link_change_notify,
 	},
 },
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR111),
+	.name		= "Aquantia AQR111",
+	.ops		= &aqr111_ops,
+},
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQR111B0),
+	.name		= "Aquantia AQR111B0",
+	.ops		= &aqr111_ops,
+},
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
 	.name		= "Aquantia AQR405",
-	.ops		= &(const struct phy_driver_ops){
-	.config_aneg    = aqr_config_aneg,
-	.config_intr	= aqr_config_intr,
-	.handle_interrupt = aqr_handle_interrupt,
-	.read_status	= aqr_read_status,
-	},
+	.ops		= &aqr106_ops,
 },
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
 	.name		= "Aquantia AQR112",
-	.ops		= &(const struct phy_driver_ops){
-	.probe		= aqr107_probe,
-	.config_aneg    = aqr_config_aneg,
-	.config_intr	= aqr_config_intr,
-	.handle_interrupt = aqr_handle_interrupt,
-	.get_tunable    = aqr107_get_tunable,
-	.set_tunable    = aqr107_set_tunable,
-	.suspend	= aqr107_suspend,
-	.resume		= aqr107_resume,
-	.read_status	= aqr107_read_status,
-	.get_rate_matching = aqr107_get_rate_matching,
-	.get_sset_count = aqr107_get_sset_count,
-	.get_strings	= aqr107_get_strings,
-	.get_stats	= aqr107_get_stats,
-	.link_change_notify = aqr107_link_change_notify,
-	},
+	.ops		= &aqr107_ops,
 },
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
 	.name		= "Aquantia AQR412",
-	.ops		= &(const struct phy_driver_ops){
-	.probe		= aqr107_probe,
-	.config_aneg    = aqr_config_aneg,
-	.config_intr	= aqr_config_intr,
-	.handle_interrupt = aqr_handle_interrupt,
-	.get_tunable    = aqr107_get_tunable,
-	.set_tunable    = aqr107_set_tunable,
-	.suspend	= aqr107_suspend,
-	.resume		= aqr107_resume,
-	.read_status	= aqr107_read_status,
-	.get_rate_matching = aqr107_get_rate_matching,
-	.get_sset_count = aqr107_get_sset_count,
-	.get_strings	= aqr107_get_strings,
-	.get_stats	= aqr107_get_stats,
-	.link_change_notify = aqr107_link_change_notify,
-	},
+	.ops		= &aqr107_ops,
 },
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR113),
 	.name		= "Aquantia AQR113",
-	.ops		= &(const struct phy_driver_ops){
-	.probe          = aqr107_probe,
-	.get_rate_matching = aqr107_get_rate_matching,
-	.config_init    = aqr113c_config_init,
-	.config_aneg    = aqr_config_aneg,
-	.config_intr    = aqr_config_intr,
-	.handle_interrupt       = aqr_handle_interrupt,
-	.read_status    = aqr107_read_status,
-	.get_tunable    = aqr107_get_tunable,
-	.set_tunable    = aqr107_set_tunable,
-	.suspend        = aqr107_suspend,
-	.resume         = aqr107_resume,
-	.get_sset_count = aqr107_get_sset_count,
-	.get_strings    = aqr107_get_strings,
-	.get_stats      = aqr107_get_stats,
-	.link_change_notify = aqr107_link_change_notify,
-	},
+	.ops		= &aqr113_ops,
 },
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR113C),
 	.name           = "Aquantia AQR113C",
-	.ops		= &(const struct phy_driver_ops){
-	.probe          = aqr107_probe,
-	.get_rate_matching = aqr107_get_rate_matching,
-	.config_init    = aqr113c_config_init,
-	.config_aneg    = aqr_config_aneg,
-	.config_intr    = aqr_config_intr,
-	.handle_interrupt       = aqr_handle_interrupt,
-	.read_status    = aqr107_read_status,
-	.get_tunable    = aqr107_get_tunable,
-	.set_tunable    = aqr107_set_tunable,
-	.suspend        = aqr107_suspend,
-	.resume         = aqr107_resume,
-	.get_sset_count = aqr107_get_sset_count,
-	.get_strings    = aqr107_get_strings,
-	.get_stats      = aqr107_get_stats,
-	.link_change_notify = aqr107_link_change_notify,
-	},
+	.ops		= &aqr113_ops,
 },
 };
 
-- 
2.43.0




More information about the Linux-mediatek mailing list