[PATCH v6 2/2] arm64: dts: mediatek: mt8195: add MDP3 nodes

Moudy Ho (何宗原) Moudy.Ho at mediatek.com
Wed Sep 27 02:02:55 PDT 2023


On Fri, 2023-09-22 at 10:29 +0200, AngeloGioacchino Del Regno wrote:
> Il 22/09/23 08:50, Moudy Ho ha scritto:
> > Add device nodes for Media Data Path 3 (MDP3) modules.
> > 
> > Signed-off-by: Moudy Ho <moudy.ho at mediatek.com>
> > ---
> >   arch/arm64/boot/dts/mediatek/mt8195.dtsi | 388
> > +++++++++++++++++++++++
> >   1 file changed, 388 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > index 4dbbf8fdab75..cf61ba7b8956 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> > @@ -1960,6 +1960,114 @@
> >   			#clock-cells = <1>;
> >   		};
> >   
> 
> ..snip..
> 
> > +
> > +		display at 14006000 {
> > +			compatible = "mediatek,mt8183-mdp3-rsz";
> 
> Please always add a SoC-specific compatible (both here and in
> bindings).
> 
> compatible = "medaitek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz";
> 
> > +			reg = <0 0x14006000 0 0x1000>;
> > +			mediatek,gce-client-reg = <&gce1
> > SUBSYS_1400XXXX 0x6000 0x1000>;
> > +			mediatek,gce-events =
> > <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>,
> > +					      <CMDQ_EVENT_VPP0_MDP_RSZ_
> > FRAME_DONE>;
> > +			clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>;
> > +		};
> > +
> 
> ..snip..
> 
> > +
> > +		dma-controller at 1400c000 {
> > +			compatible = "mediatek,mt8183-mdp3-wrot";
> 
> same here
> 
> > +			reg = <0 0x1400c000 0 0x1000>;
> > +			mediatek,gce-client-reg = <&gce1
> > SUBSYS_1400XXXX 0xc000 0x1000>;
> > +			mediatek,gce-events =
> > <CMDQ_EVENT_VPP0_MDP_WROT_SOF>,
> > +					      <CMDQ_EVENT_VPP0_MDP_WROT
> > _VIDO_WDONE>;
> > +			clocks = <&vppsys0 CLK_VPP0_MDP_WROT>;
> > +			iommus = <&iommu_vpp M4U_PORT_L4_MDP_WROT>;
> > +			power-domains = <&spm
> > MT8195_POWER_DOMAIN_VPPSYS0>;
> > +			#dma-cells = <1>;
> > +		};
> > +
> >   		mutex at 1400f000 {
> >   			compatible = "mediatek,mt8195-vpp-mutex";
> >   			reg = <0 0x1400f000 0 0x1000>;
> > @@ -2107,6 +2215,286 @@
> >   			power-domains = <&spm
> > MT8195_POWER_DOMAIN_VPPSYS1>;
> >   		};
> >   
> 
> ..snip..
> 
> > +
> > +		display at 14f14000 {
> > +			compatible = "mediatek,mt8183-mdp3-rsz";
> 
> and here
> 
> > +			reg = <0 0x14f14000 0 0x1000>;
> > +			mediatek,gce-client-reg = <&gce1
> > SUBSYS_14f1XXXX 0x4000 0x1000>;
> > +			mediatek,gce-events =
> > <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF>,
> > +					      <CMDQ_EVENT_VPP1_SVPP1_MD
> > P_RSZ_FRAME_DONE>;
> > +			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RSZ>;
> > +		};
> > +
> > +		display at 14f15000 {
> > +			compatible = "mediatek,mt8183-mdp3-rsz";
> 
> ...and here
> 
> > +			reg = <0 0x14f15000 0 0x1000>;
> > +			mediatek,gce-client-reg = <&gce1
> > SUBSYS_14f1XXXX 0x5000 0x1000>;
> > +			mediatek,gce-events =
> > <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>,
> > +					      <CMDQ_EVENT_VPP1_SVPP2_MD
> > P_RSZ_FRAME_DONE>;
> > +			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>;
> > +		};
> > +
> > +		display at 14f16000 {
> > +			compatible = "mediatek,mt8183-mdp3-rsz";
> 
> ......and here.
> 
> > +			reg = <0 0x14f16000 0 0x1000>;
> > +			mediatek,gce-client-reg = <&gce1
> > SUBSYS_14f1XXXX 0x6000 0x1000>;
> > +			mediatek,gce-events =
> > <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>,
> > +					      <CMDQ_EVENT_VPP1_SVPP3_MD
> > P_RSZ_FRAME_DONE>;
> > +			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>;
> > +		};
> > +
> 
> ..snip..
> 
> > +
> > +		dma-controller at 14f23000 {
> > +			compatible = "mediatek,mt8183-mdp3-wrot";
> 
> ...again... and for the other two occurrences of wrot as well.
> 
> Apart from that, looks good.
> 
> Regards,
> Angelo
> 

Hi Angelo,

Thank you for the advice, I will include the appropriate compatible
names to the specified locations.

Sincerely,
Moudy
> > +			reg = <0 0x14f23000 0 0x1000>;
> > +			mediatek,gce-client-reg = <&gce1
> > SUBSYS_14f2XXXX 0x3000 0x1000>;
> > +			mediatek,gce-events =
> > <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF>,
> > +					      <CMDQ_EVENT_VPP1_SVPP1_MD
> > P_WROT_FRAME_DONE>;
> > +			clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_WROT>;
> > +			iommus = <&iommu_vdo
> > M4U_PORT_L5_SVPP1_MDP_WROT>;
> > +			power-domains = <&spm
> > MT8195_POWER_DOMAIN_VPPSYS1>;
> > +			#dma-cells = <1>;
> > +		};
> > +
> > +		dma-controller at 14f24000 {
> > +			compatible = "mediatek,mt8183-mdp3-wrot";
> > +			reg = <0 0x14f24000 0 0x1000>;
> > +			mediatek,gce-client-reg = <&gce1
> > SUBSYS_14f2XXXX 0x4000 0x1000>;
> > +			mediatek,gce-events =
> > <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>,
> > +					<CMDQ_EVENT_VPP1_SVPP2_MDP_WROT
> > _FRAME_DONE>;
> > +			clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>;
> > +			iommus = <&iommu_vdo
> > M4U_PORT_L5_SVPP2_MDP_WROT>;
> > +			power-domains = <&spm
> > MT8195_POWER_DOMAIN_VPPSYS1>;
> > +			#dma-cells = <1>;
> > +		};
> > +
> > +		dma-controller at 14f25000 {
> > +			compatible = "mediatek,mt8183-mdp3-wrot";
> > +			reg = <0 0x14f25000 0 0x1000>;
> > +			mediatek,gce-client-reg = <&gce1
> > SUBSYS_14f2XXXX 0x5000 0x1000>;
> > +			mediatek,gce-events =
> > <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>,
> > +					<CMDQ_EVENT_VPP1_SVPP3_MDP_WROT
> > _FRAME_DONE>;
> > +			clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>;
> > +			iommus = <&iommu_vpp
> > M4U_PORT_L6_SVPP3_MDP_WROT>;
> > +			power-domains = <&spm
> > MT8195_POWER_DOMAIN_VPPSYS1>;
> > +			#dma-cells = <1>;
> > +		};
> > +
> >   		imgsys: clock-controller at 15000000 {
> >   			compatible = "mediatek,mt8195-imgsys";
> >   			reg = <0 0x15000000 0 0x1000>;
> 
> 


More information about the Linux-mediatek mailing list